so my question is how can i mofidfied the IP MIG for reach 800 Mb/s on the nexys video?
when i open the IP for modified teh parameters in clock period i set 2500 ps, input clock period 1250 ps (800 MHz), system clock : No buffer, Reference clock: Diferencial, clk_reference with pin number R4/T4, so when i run the synthesis occurs a problem in the clk_ref
Note: some of the setting of my IP MIG
In this part i connect the pins R4 and T4 in the CLK_ref_p and CLK_REF_n. but in the synthesis occurs a problem
Question
ManuelPA
I have implemented the DDR3 on the Nexys VIDEO as shown in this tutorial
https://reference.digilentinc.com/nexys-video/gsmb
so my question is how can i mofidfied the IP MIG for reach 800 Mb/s on the nexys video?
when i open the IP for modified teh parameters in clock period i set 2500 ps, input clock period 1250 ps (800 MHz), system clock : No buffer, Reference clock: Diferencial, clk_reference with pin number R4/T4, so when i run the synthesis occurs a problem in the clk_ref
Note: some of the setting of my IP MIG
In this part i connect the pins R4 and T4 in the CLK_ref_p and CLK_REF_n. but in the synthesis occurs a problem
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.