AUR Posted March 13, 2018 Share Posted March 13, 2018 i want to recieve video packets from hdmi port and send it over ethernt RJ45 connector how it can be done with PYNQ board. Link to comment Share on other sites More sharing options...
jpeyron Posted March 13, 2018 Share Posted March 13, 2018 Hi @AUR, Have you tried reaching out to the pynq support or looked through their projects/demo/tutorials? I believe another potential option is use the petalinux platform for the arty-z7-20 available on the Petalinux Support for Digilent Boards table. thank you, Jon Link to comment Share on other sites More sharing options...
AUR Posted March 13, 2018 Author Share Posted March 13, 2018 Just now, jpeyron said: Hi @AUR, Have you tried reaching out to the pynq support or looked through their projects/demo/tutorials? I believe another potential option is use the petalinux platform for the arty-z7-20 available on the Petalinux Support for Digilent Boards table. thank you, Jon @jpeyron yes i've seen pynq support but no help availble regarding this. and i've also seen arty-z7 but again question is same how this will be done. Link to comment Share on other sites More sharing options...
jpeyron Posted March 13, 2018 Share Posted March 13, 2018 Hi @AUR, I have not worked with petalinux or Jupyter Notebook enough to be able to help with this. My understanding would be that you would create a custom application in c (petalinux) or python (Jupyter Notebook) that takes the data packets from the hdmi and sends it over the ethernet. Here are some python libraries you could look at. OpenCV might be helpful as well. thank you, Jon Link to comment Share on other sites More sharing options...
Question
AUR
i want to recieve video packets from hdmi port and send it over ethernt RJ45 connector how it can be done with PYNQ board.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.