Arty Z7 Petalinux- Bitstream not compatible with the target

[skaat27]

I have an arty z7 FPGA an am working on a petalinux project. I am able to config and build my project. But when i boot it it says bitstream is not compatible with the target. What does that mean? any suggestions? I exported the HDF from vivado and in project settings the target device is same as the one i am using.

[jpeyron]

Hi @skaat27,

Which Arty-Z7 do you have the 20 or the 10 as shown here. Are you using our board files? If so, which board did you select? Are you using one of our projects as a reference? If so which one?

cheers,

Jon

[skaat27]

@jpeyron

Hey, I am past that issue. Now when i try to boot via JTAG it says memory read error. when i try with SD card the kernel boot gets stuck at

 

anufacturer ID: 3
OEM: 5344
Name: AALCD
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 29.7 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading image.ub
9028612 bytes read in 772 ms (11.2 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
   Using 'conf@1' configuration
   Verifying Hash Integrity ... OK
   Trying 'kernel@0' kernel subimage
     Description:  Linux Kernel
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x100000d4
     Data Size:    3828608 Bytes = 3.7 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x00008000
     Entry Point:  0x00008000
     Hash algo:    sha1
     Hash value:   4bcad4b704b89428eb11f11e914aa200c6929ea7
   Verifying Hash Integrity ... sha1+ OK
## Loading ramdisk from FIT Image at 10000000 ...
   Using 'conf@1' configuration
   Trying 'ramdisk@0' ramdisk subimage
     Description:  ramdisk
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x103aa678
     Data Size:    5183900 Bytes = 4.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: unavailable
     Entry Point:  unavailable
     Hash algo:    sha1
     Hash value:   cf98121f7415ac2eb8023d0d0b330834fe3cd785
   Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
   Using 'conf@1' configuration
   Trying 'fdt@0' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x103a6d48
     Data Size:    14462 Bytes = 14.1 KiB
     Architecture: ARM
     Hash algo:    sha1
     Hash value:   25510021f3481108cde4be1925ff8aceadda1edd
   Verifying Hash Integrity ... sha1+ OK
   Booting using the fdt blob at 0x103a6d48
   Loading Kernel Image ... OK
   Loading Ramdisk to 07b0e000, end 07fff99c ... OK
   Loading Device Tree to 07b07000, end 07b0d87d ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.0-xilinx (skaat27@localhost.localdomain) (gcc v                                                                                                             ersion 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP PREEMPT Fri Sep 15 11:                                                                                                             13:00 PDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio                                                                                                             n cache
[    0.000000] Machine model: peta2016.4
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] cma: Reserved 16 MiB at 0x1f000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 12 pages/cpu @debcc000 s19776 r8192 d21184 u4915                                                                                                             2
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                                                                                             es: 130048
[    0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 489456K/524288K available (5286K kernel code, 230K rwdata                                                                                                             , 1848K rodata, 1024K init, 222K bss, 18448K reserved, 16384K cma-reserved, 0K h                                                                                                             ighmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07f793c   (8127 kB)
[    0.000000]       .init : 0xc0800000 - 0xc0900000   (1024 kB)
[    0.000000]       .data : 0xc0900000 - 0xc0939ba0   ( 231 kB)
[    0.000000]        .bss : 0xc0939ba0 - 0xc09713a4   ( 223 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] efuse mapped to e0800000
[    0.000000] slcr mapped to e0802000
[    0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x7276                                                                                                             0000
[    0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x7                                                                                                             2760000
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
[    0.000000] zynq_clock_init: clkc starts at e0802100
[    0.000000] Zynq clock init
[    0.000010] sched_clock: 64 bits at 325MHz, resolution 3ns, wraps every 43980                                                                                                             46511103ns
[    0.007907] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycle                                                                                                             s: 0x4af477f6aa, max_idle_ns: 440795207830 ns
[    0.018985] Switching to timer-based delay loop, resolution 3ns
[    0.025014] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, ma                                                                                                             x_idle_ns: 551318127 ns
[    0.034124] timer #0 at e080a000, irq=17
[    0.038406] Console: colour dummy device 80x30
[    0.042755] Calibrating delay loop (skipped), value calculated using timer fr                                                                                                             equency.. 650.00 BogoMIPS (lpj=3250000)
[    0.053300] pid_max: default: 32768 minimum: 301
[    0.058102] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.064649] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.072379] CPU: Testing write buffer coherency: ok
[    0.077332] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.082954] Setting up static identity map for 0x100000 - 0x100058
[    0.188585] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.188687] Brought up 2 CPUs
[    0.197273] SMP: Total of 2 processors activated (1300.00 BogoMIPS).
[    0.203689] CPU: All CPU(s) started in SVC mode.
[    0.209286] devtmpfs: initialized
[    0.215061] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9                                                                                                              rev 4
[    0.222969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                                             x_idle_ns: 19112604462750000 ns
[    0.233680] pinctrl core: initialized pinctrl subsystem
[    0.240071] NET: Registered protocol family 16
[    0.246323] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.278221] cpuidle: using governor menu
[    0.289495] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint                                                                                                              registers.
[    0.297387] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.303452] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
[    0.310280] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized

 

After this it wouldnt continue. Do know how to proceed in both the cases??

[jpeyron]

Hi @skaat27,

I have reached out to a more experienced embedded linux co-worker about your forum question. They are out of the office this week and probably will not be able to respond until later next week.  I am sorry for the inconvenience.

thank you,

Jon

[sbobrowicz]

Are you powering from USB or from the Wall? Does the Done LED become unilluminated when it crashed while booting from SD?

Looking at your log, it looks like you started with the Arty Z7 HDMI project. Can you verify this is the case (and that you didn't start from, say, the Zybo HDMI input project)? Also, please let me know if you are using the Arty Z7-10 or Arty Z7-20.