shahabamo Posted October 9, 2015 Share Posted October 9, 2015 Hello, My JTAG HS2 firmware accidentally erased while i was trying to program another FTDI device connected to the PC and the programmer is not detected anymore by Xilinx Impact. Please help me how to recover it? Link to comment Share on other sites More sharing options...
0 Cristian.Fatu Posted October 14, 2015 Share Posted October 14, 2015 I have sent you on your e-mail the link to the repair utility and the instructions. Since this application should only be used just in emergency situations like this one, we prefer to keep in some kind of "shadow" and we don't want to have it posted on the forum. We provide it when requested. shahabamo 1 Link to comment Share on other sites More sharing options...
1 Iriy Posted August 27, 2018 Share Posted August 27, 2018 Hello @Bianca, Like other people in this topic, I accidently erased my JTAG-SMD1 with wrong FTDI program. Can you help me? Best Regards, Iriy Link to comment Share on other sites More sharing options...
1 jpeyron Posted May 13, 2019 Share Posted May 13, 2019 Hi @mjdbishop, I have PM'd you about this. best regards, Jon Link to comment Share on other sites More sharing options...
0 shahabamo Posted October 11, 2015 Author Share Posted October 11, 2015 Any answer? Link to comment Share on other sites More sharing options...
0 JColvin Posted October 12, 2015 Share Posted October 12, 2015 Hi shahabamo, I have asked some of our applications engineers about this who will get back to you here on the forum. Thanks,JColvin Link to comment Share on other sites More sharing options...
0 shahabamo Posted October 15, 2015 Author Share Posted October 15, 2015 It worked! Thank you for your kind support! Link to comment Share on other sites More sharing options...
0 straytms Posted October 31, 2016 Share Posted October 31, 2016 Hi Cristian.Fatu, My JTAG-HS2 doesn't work normal again after I trying to modify some data on the ROM with FT Prog, now have no clue to recover it, I really need it. Can you help about that? Link to comment Share on other sites More sharing options...
0 Bianca Posted November 1, 2016 Share Posted November 1, 2016 @straytms, You have a private message with the application. Best regards, Bianca Link to comment Share on other sites More sharing options...
0 CWONG Posted December 21, 2016 Share Posted December 21, 2016 Hi digilent, Same issue over here after FTDI prgramming. Could someone help me to recover this? Link to comment Share on other sites More sharing options...
0 Bianca Posted December 21, 2016 Share Posted December 21, 2016 (edited) Hi @CWONG, Sure, check your private messenger. Regards, Bianca Edited December 21, 2016 by Bianca Link to comment Share on other sites More sharing options...
0 Mihamed Posted February 27, 2017 Share Posted February 27, 2017 Hello, after some problems i erased accedentaly the firmware on jtag hs2. Can you help me please ? Link to comment Share on other sites More sharing options...
0 jpeyron Posted February 27, 2017 Share Posted February 27, 2017 Hi Mihamed, @Bianca or @attila should be able to help you with this issue when they are in next. cheers, Jon Link to comment Share on other sites More sharing options...
0 Mihamed Posted February 28, 2017 Share Posted February 28, 2017 Thank You jpeyron! Link to comment Share on other sites More sharing options...
0 Bianca Posted February 28, 2017 Share Posted February 28, 2017 (edited) @Mihamed, Please check your private messenger. Best regards, Bianca Edited February 28, 2017 by Bianca Link to comment Share on other sites More sharing options...
0 Franco Posted May 31, 2017 Share Posted May 31, 2017 Hi everyone, I've just made the same mistake, instead of another FTDI chip, I erased JTAG-HS2. Could someone help me with this? Link to comment Share on other sites More sharing options...
0 jpeyron Posted May 31, 2017 Share Posted May 31, 2017 Hi @Franco, @Bianca or @attila should be able to help you with this issue when they are in next. cheers, Jon Link to comment Share on other sites More sharing options...
0 Bianca Posted June 12, 2017 Share Posted June 12, 2017 Hi @Franco, Sorry for the late response. I was out of office for a week. I will provide you the application in case no one attended you until now. Best regards, Bianca Link to comment Share on other sites More sharing options...
0 Sklozgos Posted August 1, 2017 Share Posted August 1, 2017 Hi. I have the same problem. I also reprogrammed ftdi and JTAG-HS2. I did not change anything, but after reading and writing the device is not detected as a programmer. Please help. Link to comment Share on other sites More sharing options...
0 Bianca Posted August 1, 2017 Share Posted August 1, 2017 Hi @Sklozgos, Check your private messenger for the solution. Best regards, Bianca Link to comment Share on other sites More sharing options...
0 albayrak Posted October 2, 2017 Share Posted October 2, 2017 Hi, My Digilent Jtag HS2 programmer Cable has been broken by wrong power, I have changed the ft232hq chip on the board, Pc has recognized the Cable Digilent Jtag HS2 but FTPROG has no xml file therefore Impact has not recognized it, Could you please send me FtProg Config File (xml) ? Best Regards, C.Albayrak Link to comment Share on other sites More sharing options...
0 tom.reap Posted October 2, 2017 Share Posted October 2, 2017 I appear to have done the same thing with my HS2 Rev A cable. I was using FT prog to flash something else and have erased my JTAG cable in the process. How do I got about getting it restored? Thanks Tom Reap Link to comment Share on other sites More sharing options...
0 Bianca Posted October 2, 2017 Share Posted October 2, 2017 Hello @albayrak, @tom.reap, You both have a private message regarding your problems. Best regards, Bianca Link to comment Share on other sites More sharing options...
0 Jun Yeon Posted October 13, 2017 Share Posted October 13, 2017 (edited) Hello, @Cristian.Fatu, @Bianca I have the same problem. I use the JTAG-SMT1 mounted on the Xilinx Kintex-7 evaluation kit (KC705). I accidentally programmed the JTAG-SMT1 using FT_prog incorrectly. Can I recover it? Best regards, Jun Yeon Edited October 13, 2017 by Jun Yeon Link to comment Share on other sites More sharing options...
0 jpeyron Posted October 13, 2017 Share Posted October 13, 2017 Hi @Jun Yeon, I am re-tagging the engineer that currently handles EEPROM issues to make sure they see this forum thread ( @Bianca). cheers, Jon Link to comment Share on other sites More sharing options...
0 Jun Yeon Posted October 14, 2017 Share Posted October 14, 2017 Jon, Thank you for your kindness. Link to comment Share on other sites More sharing options...
Question
shahabamo
Hello,
My JTAG HS2 firmware accidentally erased while i was trying to program another FTDI device connected to the PC and the programmer is not detected anymore by Xilinx Impact.
Please help me how to recover it?
Link to comment
Share on other sites
137 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now