-
Posts
6,990 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Everything posted by attila
-
Adjust Digital IO system frequency in Python API
attila replied to HarissonJones's question in Test and Measurement
Hi @Steve_3 The PLL has a fractional option for finer frequency synthesis. This is not used since it introduces jitter which can affect the ADC and DAC performance. Depending on use, like for digital signals it could be acceptable. If you need this, I could try enabling it next week.- 31 replies
-
- digital discovery
- python
-
(and 1 more)
Tagged with:
-
Adjust Digital IO system frequency in Python API
attila replied to HarissonJones's question in Test and Measurement
Hi @Steve_3 On AD3 the supported frequencies are limited by the device PLL and its 25MHz reference clock. To obtain other frequencies external reference clock can be supplied through trigger 1 IO, with 10.42MHz ref clock it can generate 83.36MHz A distribution of the supported frequency steps looks like this, 50-125MHz- 31 replies
-
- digital discovery
- python
-
(and 1 more)
Tagged with:
-
Firmware change is possible for between ADP5250 and NI virtual bench?
attila replied to iPsych's question in Test and Measurement
Hi @iPsych Yes. There is no need to reprogram, Virtual Bench can be used with newer version of WaveForms: -
IV Sweep for MOSFET on Analog Discovery 3
attila replied to Anirud Durani's question in Test and Measurement
Hi @Anirud Durani You could use the following adapter which has support in WaveForms application 'Tracer' instrument. https://digilent.com/reference/test-and-measurement/transistor-tester-adapter/start The Scope and AWG instruments can also be used for IV curves and for most of the devices the Power Supply IOs can be used as slow AWG, like for for higher drain current. API is available for all T&M devices. -
Analog Discovery 3 Custom Waveform and Continuous Clock
attila replied to Empower's question in Test and Measurement
Hi @Empower Pad the custom pattern with 1s, like it is done here in the app: If the 2048 samples provided by the default (1st) configuration are not sufficient use the 5th (index 4) device configuration. If you want to keep the custom pattern in phase with the clock, make sure to configure multiple of periods: custom samples / custom frequency = N / clock frequency, like 2000/100MHz = 20/500kHz You can use the following parameter to keep the device running after software close, application exit: dwf.FDwfParamSet(DwfParamOnClose, c_int(0)) # 0 = run, 1 = stop, 2 = shutdown -
WaveForms SDK - custom Wavegen in c++ with data
attila replied to Sheldon's question in Test and Measurement
Hi @Sheldon Set finite run time and repeat like: FDwfAnalogOutRunSet(hdwf, 1.0/hzWave); FDwfAnalogOutRepeatSet(hdwf, 1); See the manual: -
Try to use SPI function in digital discovery in Linux. Undefined symbol
attila replied to minghan chao's question in Test and Measurement
Hi @minghan chao Probably you have a very old digilent.waveforms installed without this function. You can find the latest software at: https://digilent.com/reference/software/adept/start https://digilent.com/reference/software/waveforms/waveforms-3/start -
Help Needed: Configuration Issues with Analog Discovery 2 Units
attila replied to pieb's question in Test and Measurement
Hi @pieb This usually indicates USB supply or cable contact problem. Try using the original USB cable or other cables you have at hand, try other USB sockets or computer, powered hub or 5V DC auxiliary supply... -
Logic analyzer custom protocol script problem
attila replied to s4msepi0l's question in Test and Measurement
Hi @s4msepi0l Please split the values and use different flags. I don't want to make the values larger, since this would increase memory usage, would be slower, above 52bits incompatible with the Script tool... -
-
Noise on Channel 1 - Analog Discovery Pro
attila replied to Piotr's question in Test and Measurement
Hi @Piotr Notice that warning "Channel 1 range will be extended !" You have set the trigger to C1 30V, so the C1 is set to high range 50V pk2pk (lower resolution) and the other channels are at low range (higher resolution). The channel range is adjusted not only by the specified Range but also according the trigger level if needed to make sure it captures that value and it switches also to higher range if offset exceeds +/-1V. See the Help tab / ADP3450 The next software version will also bring channel option for Impedance Analyzer. -
Hi @TOIVI Thanks for sharing this. I'll add to support it natively. Edit: Instead of: if ((Symbol == 7) || (Symbol == 7)){ //SOF or EOD you probably wanted: if ((Symbol == 6) || (Symbol == 7)){ //SOF or EOD
-
Controlling external power supply via MODBUS or SCPI ?
attila replied to nurber3's question in Test and Measurement
Hi @nurber3 Custom UI integration is not supported in the WF application, only custom JS scripting in the Scrip tool. -
how to select mode of analog discovery 2 via the sdk
attila replied to mikeyc's question in Test and Measurement
-
Discovery 2 CAN FD separate sampling points for nominal and data phase
attila replied to drdglbvc's question in Test and Measurement
Hi @drdglbvc I thank you for your contribution. -
Hi @3D_loves_eng The next application version will add support for serial ports, so from Script you can communicate through COM ports.
-
Discovery 2 CAN FD separate sampling points for nominal and data phase
attila replied to drdglbvc's question in Test and Measurement
Hi @drdglbvc -
Hi @3D_loves_eng With WaveForms Script tool external applications can be accessed, see Tool.exec/start functions, so you could call the USB/GPIB command app (if such exists) to send commands. The WaveForms app supports controlling any device + DPS (or two identical devices), so you can control ADP3450 and DPS3340 from the same application. With custom app/script multiple devices can be controlled.
-
A couple of minor BNC Adapter suggestions
attila replied to nurber3's question in Test and Measurement
Hi @nurber3 Thanks for the observation. I forwarded it to the people in charge. -
-
Hi @nurber3 The reason for switching to a single row toolbar is to have more usable screen space. The further trigger options are available in the dropdown. The trigger level can also be adjusted by drag on the right side or level arrow, hysteresis with scroll on right or by the half arrows, the position on top or bottom, length and holdoff by half arrows.
-
Analog Discovery 2x15 mating header
attila replied to Kylee Burgess's question in Test and Measurement
Hi @Kylee Burgess See the following post: -
How do I change clocking option of Analog Discovery 3 with pydwf?
attila replied to Empower's question in Test and Measurement
Hi @Empower See the FDwfDeviceParamSet DwfParamFrequency in the SDK manual.- 3 replies
-
- analog discovery 3
- dwf
-
(and 1 more)
Tagged with:
-
Continue to output clock waveform repeatedly
attila replied to Hiro's question in Test and Measurement