Jump to content

attila

Technical Forum Moderator
 View Profile  See their activity

  • Posts

    6,990

  • Joined

  • Last visited

 Content Type 

Everything posted by attila

  1. attila
    Hi @TOIVI
  2. attila
    Hi @nurber3
  3. attila
    Hi @RajatDas No, .Export closes the file.
  4. attila
    Hi @nurber3 It could be a contact or system issue. Have you tried using other cable, hub... ?
  5. attila
    Hi @AstroKevin See the WF SDK/ samples/ py/ AnalogIO_DigitalDiscovery.py and WaveForms SDK Reference Manual.pdf / Devices/ Digital Discovery section.
  6. attila
    Hi @nurber3 The trigger level arrows show wrong (filter) channel color when trigger source is a Wavegen loopback and Filters are hidden. Fixed for the next version. Thanks for the observation.
  7. attila
    Hi @maierkomor Almost there, just not visible. + Add/ Signal/ DIO 1 or protocol you need.
  8. attila
    Hi @maierkomor
  9. attila
    Hi @maierkomor Could you attach the CVS ?
  10. attila
    Hi @mwb1100 This is not possible but you can add reference channels at different sampling rates, shift the channels to align. First make sure to set the sampling mode to Decimate.
  11. attila
    Hi @maierkomor The first 'All' column exclusive, to load sample value, for all bits. Like value 3 will be loaded as DIO-0 = 1, DIO-1 = 1, DIO-2 = 0, ... The following ones can be used to load 0/1 value for each bit. You probably want to use this:
  12. attila
    Hi @lvogl The odd captures may look like an internal error, badly phased ADC or DAC data. Make sure to have new WaveForms version installed. Check if the problem persists with WaveForms application.
  13. attila
    Hi @ilan No. For JTAG only one port is available. The SPI and JTAG use the same/shared resources so only one can be enabled at a time. The frequency can be configured by DjtgSetSpeed and DspiSetSpeed
  14. attila
    Hi @TOIVI And what about 3 and other stroke numbers ?
  15. attila
    Hi @ilan DspiEnableEx
  16. attila
    Hi @javier_munoz Take a look at Analog Discovery 3 and ADP3450: https://digilent.com/reference/test-and-measurement/start
  17. attila
    Hi @Takuya The ADP5250/VirtualBench only supports SPI an I2C in Protocol tool Master and Custom modes, the SPI only in standard mode and 8,16,24,32bit words.
  18. attila
    Hi @chris007 Increase the sample Rate or use the Protocol/ I2C/ Spy.
  19. attila
    Hi @TOIVI Adding 'RPM multiplier' option.
  20. attila
    Hi @torbos The easier is to use a Trigger IO for source, like T1 trigsrcExternal1
  21. attila
    Hi @iPsych Virtual Bench and ADP5250 are only supported on 32-bit and 64-bit Windows due to driver availability. https://digilent.com/reference/test-and-measurement/analog-discovery-pro-5250/start
  22. attila
    Hi @Steve_3 Could you provide more detail ? some screenshots would be helpful
  23. attila
    Hi @m72 Thanks for the observation. Fixed for the next version.
  24. attila
    Hi @Piotr Is it working now correctly ? Looking at this again, to be able to set the trigger level to 30V with 0V offset, you probably have also set 10x? Attenuation for Channel 1, so signal and noise are both visually amplified, with 10X you have 500Vpk2pk range.
  25. attila
    Hi @TOIVI
×
×
  • Create New...