generating Bitstream in HDMI-Demo fails (Vivado 2016.4)

[leso1300]

Hello everyone,
I'm a beginner at Vivado. I am using Vivado 2016.4 and the Nexys Video Board.
I've been trying for some days to generate the bitstream for the HDMI-Demo (https://reference.digilentinc.com/learn/programmable-logic/tutorials/nexys-video-hdmi-demo/start).
But after creating the project with the tcl console I got the error message that some IPs (hdmi_axi_dynclk_0_0, hdmi_rgb2dvi_0_0, hdmi_dvi2rgb_0_0) are locked.  So I already upgraded them but now I get the following error messages and have no idea how to solve it.

[Synth 8-3302] unable to open file '900p_edid.txt' in 'r' mode [EEPROM_8b.vhd:90]
[Synth 8-421] mismatched array sizes in rhs and lhs of assignment [EEPROM_8b.vhd:115]
[Synth 8-285] failed synthesizing module 'EEPROM_8b' [EEPROM_8b.vhd:85]
[Synth 8-285] failed synthesizing module 'dvi2rgb' [dvi2rgb.vhd:110]
[Synth 8-285] failed synthesizing module 'hdmi_dvi2rgb_0_3' [hdmi_dvi2rgb_0_3.vhd:80]
[Synth 8-285] failed synthesizing module 'hdmi' [hdmi.vhd:5987]
[Synth 8-285] failed synthesizing module 'hdmi_wrapper' [hdmi_wrapper.vhd:49]
[Common 17-69] Command failed: Synthesis failed - please see the console or run log file for details

I already looked at the forum here and consulted google, but found no solution or a similar problem there.
Does anyone of you solved this problem already or has an idea how to solve it?
I would be very thankful for any kind of idea.

[jpeyron]

Hi @leso1300,

I believe this is because the project you downloaded also need the contents in the repo->vivado-library to also be downloaded and added to the project. here is a link to the vivado library folder that needs to be downloaded. I also attached a project with this already done. 

cheers,

Jon

Nexys-Video-HDMI.zip

[leso1300]

Hi @jpeyron,

Now it works
Thank you very much for your fast and helpful answer.

Regards