Leon18 Posted September 11, 2023 Share Posted September 11, 2023 Agile Mixed Signaling (AMS) Connector, J2 is not the same as the layout from Hardware user guide. It has to be rotated 180 degree clockwise. Where can I find the gerberfiles of Zedboard? Link to comment Share on other sites More sharing options...
0 JColvin Posted September 11, 2023 Share Posted September 11, 2023 Hi @Leon18, The AMS header / XADC header on J2 is accurate; there is an existing silkscreen printing indicating the corner location of pin 1 (also indicated by the square pin on the underside of the board) that corresponds to Vn as per Table 17 of Avnet's Hardware User Guide as well as the schematic of the Zedboard (lower left corner on page 2): https://digilent.com/reference/programmable-logic/zedboard/start#documentation. I do not know why the diagram presented in Avnet's documentation is rotated 180 degrees from how the hardware has existed since it first launched in 2013. Thanks, JColvin Link to comment Share on other sites More sharing options...
0 Leon18 Posted September 13, 2023 Author Share Posted September 13, 2023 On 9/11/2023 at 11:48 PM, JColvin said: Hi @Leon18, The AMS header / XADC header on J2 is accurate; there is an existing silkscreen printing indicating the corner location of pin 1 (also indicated by the square pin on the underside of the board) that corresponds to Vn as per Table 17 of Avnet's Hardware User Guide as well as the schematic of the Zedboard (lower left corner on page 2): https://digilent.com/reference/programmable-logic/zedboard/start#documentation. I do not know why the diagram presented in Avnet's documentation is rotated 180 degrees from how the hardware has existed since it first launched in 2013. Thanks, JColvin Thank you for your info. The gerber files is not available on digilent website. I want to study the layout of the Zedboard. Where can I find gerber files for Zedboard? Link to comment Share on other sites More sharing options...
0 asmi Posted September 13, 2023 Share Posted September 13, 2023 5 hours ago, Leon18 said: The gerber files is not available on digilent website. I want to study the layout of the Zedboard. Where can I find gerber files for Zedboard? Nowhere - they are not publicly available. JColvin 1 Link to comment Share on other sites More sharing options...
0 Leon18 Posted September 15, 2023 Author Share Posted September 15, 2023 On 9/13/2023 at 4:07 PM, asmi said: Nowhere - they are not publicly available. Someone posted dxf files here. But is is missing one layer (https://forum.digilent.com/topic/20558-zed-board-design-files-gerbers/) Link to comment Share on other sites More sharing options...
0 asmi Posted September 16, 2023 Share Posted September 16, 2023 5 hours ago, Leon18 said: Someone posted dxf files here. But is is missing one layer (https://forum.digilent.com/topic/20558-zed-board-design-files-gerbers/) DXF and gerbers are two different things. Link to comment Share on other sites More sharing options...
Question
Leon18
Agile Mixed Signaling (AMS) Connector, J2 is not the same as the layout from Hardware user guide. It has to be rotated 180 degree clockwise. Where can I find the gerberfiles of Zedboard?
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now