dyne21 Posted August 10, 2023 Share Posted August 10, 2023 (edited) Hello, Board: Genesys-2, Vivado 2019.1 I found the default DDR3 CL was set to 13 at 900MHz from MIG. If I want to increase it to 14, what is the correct way? Is it achievable with modifying .prj file? I found many .prj files in my project folder as below. Please advise the correct way. ubuntu@ubuntu:~/Xilinx/Vivado/2019.1/Genesys_2_QSPI_backup$ find . -type f -name "mig*.prj" ./Genesys_2_QSPI.srcs/sources_1/bd/design_1/ip/design_1_mig_7series_0_0/design_1_mig_7series_0_0/mig.prj ./Genesys_2_QSPI.srcs/sources_1/bd/design_1/ip/design_1_mig_7series_0_0/mig_b.prj ./Genesys_2_QSPI.srcs/sources_1/bd/design_1/ip/design_1_mig_7series_0_0/mig_a.prj ./Genesys_2_QSPI.ip_user_files/mem_init_files/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/ies/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/xsim/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/questa/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/activehdl/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/modelsim/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/xcelium/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/riviera/mig_b.prj ./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/vcs/mig_b.prj Thanks. Edited August 10, 2023 by dyne21 information missed. Link to comment Share on other sites More sharing options...
0 zygot Posted August 11, 2023 Share Posted August 11, 2023 (edited) You can create your own custom target memory device in the MIG tool and specify any parameter setting that you want to experiment with. Edited August 11, 2023 by zygot Link to comment Share on other sites More sharing options...
0 asmi Posted August 11, 2023 Share Posted August 11, 2023 On 8/9/2023 at 9:55 PM, dyne21 said: I found the default DDR3 CL was set to 13 at 900MHz from MIG. If I want to increase it to 14, what is the correct way? Can you please let us know why would you want to do that? Just curious. Link to comment Share on other sites More sharing options...
0 JColvin Posted August 14, 2023 Share Posted August 14, 2023 Hi @dyne21, Zygot is correct that you would need to create your own custom part within the MIG tool to specify these custom parameters, to which you would then hopefully be able to generate a bitstream. Though I too am curious why are wanting to change the DDR3 manufacturer recommended CL to a different value. I can guess at reasons of course, but they will still only be guesses on my end. Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
dyne21
Hello,
Board: Genesys-2, Vivado 2019.1
I found the default DDR3 CL was set to 13 at 900MHz from MIG. If I want to increase it to 14, what is the correct way?
Is it achievable with modifying .prj file? I found many .prj files in my project folder as below. Please advise the correct way.
ubuntu@ubuntu:~/Xilinx/Vivado/2019.1/Genesys_2_QSPI_backup$ find . -type f -name "mig*.prj"
./Genesys_2_QSPI.srcs/sources_1/bd/design_1/ip/design_1_mig_7series_0_0/design_1_mig_7series_0_0/mig.prj
./Genesys_2_QSPI.srcs/sources_1/bd/design_1/ip/design_1_mig_7series_0_0/mig_b.prj
./Genesys_2_QSPI.srcs/sources_1/bd/design_1/ip/design_1_mig_7series_0_0/mig_a.prj
./Genesys_2_QSPI.ip_user_files/mem_init_files/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/ies/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/xsim/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/questa/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/activehdl/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/modelsim/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/xcelium/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/riviera/mig_b.prj
./Genesys_2_QSPI.ip_user_files/sim_scripts/design_1/vcs/mig_b.prj
Thanks.
Edited by dyne21information missed.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now