Basys3 Drivers Replaced and Not

[ajbristow]

I changed my drivers to program my iCEstick FPGA with APIO Zadig. Following this Vivado no longer recognizes my Basy3 FPGA device with the "auto connect" feature. I have tried reinstalling drivers. I have followed several methods for resolving this including:

 

https://support.xilinx.com/s/article/59128?language=en_US

https://support.xilinx.com/s/article/54382?language=en_US

 

I have also completely reinstalled Vivado. 

 

Here is what my Digilent USB interface 0 looks like:

 

Here is what interface 1 looks like (this is what its drivers are supposed to be):

 

 

 

 

Could someone please assist with this? Thanks!

[ajbristow]

I fixed it by downloading from this link: https://ftdichip.com/drivers/d2xx-drivers/

 

Note: if you are using APIO and Zadig it can mess with the drivers for other devices I guess. Just have this here handy.

[JColvin]

Hi @ajbristow,

Thanks for sharing what worked for you. I've seen previous reports that Zadig can be a little too good in fulfilling its role, https://forum.digilent.com/topic/25705-windows-recognises-eclypse-z7-board-incorrectly-as-a-trion-board-in-device-manager/#comment-76839, so I'm glad the resolution process was easier for you in this instance.

Thanks,
JColvin