ajbristow
-
Posts
3 -
Joined
-
Last visited
ajbristow's Achievements
Newbie (1/4)
0
Reputation
-
I have been running into an issue with my BASYS3. I cannot get Vivado to detect it. I have reinstalled Vivado, making sure to install the USB drivers. I have following instruction from this to reinstall drivers: https://support.xilinx.com/s/article/54382?language=en_US. I have downloaded the FTDI driver files from this link: https://ftdichip.com/wp-content/uploads/2021/08/CDM212364_Setup.zip. I downloaded Adept and it cannot see my device. This is what my device manager looks like is attached here. I ordered another new BASYS3 and it also was not able to "auto-connect" in the Vivado Hardware Manger. I have tried about every solution and I do not know how to fix this besides just buying a new computer at this point. I think this issue stems from using APIO in conjunction with ZADIG to change my driver for another FPGA. However, when I open ZADIG the original driver shows. Please assist with resolving this, thank you.
Specifics
Windows 10Vivado 2023.2
Basys3- XC7A35T-ICPG236C
-
Please provide these instructions to reprogram my BASYS3 FTDI.
-
I fixed it by downloading from this link: https://ftdichip.com/drivers/d2xx-drivers/ Note: if you are using APIO and Zadig it can mess with the drivers for other devices I guess. Just have this here handy.
-
I changed my drivers to program my iCEstick FPGA with APIO Zadig. Following this Vivado no longer recognizes my Basy3 FPGA device with the "auto connect" feature. I have tried reinstalling drivers. I have followed several methods for resolving this including: https://support.xilinx.com/s/article/59128?language=en_US https://support.xilinx.com/s/article/54382?language=en_US I have also completely reinstalled Vivado. Here is what my Digilent USB interface 0 looks like: Here is what interface 1 looks like (this is what its drivers are supposed to be): Could someone please assist with this? Thanks!
