I had no Problem to program the qspi from Vivado by following the guide from the resource center. But that only gives me the hardware configuration. I also need to Program the Microblaze from the SDK. In previous projects with the ISE tool I used the iMPACT tool from Xilinx, but that doesn't seem to be available!?
What is the best and easiest way to do a full programming (hardware and microblaze software) from the SDK?
I am using the Vivado 2015.3 WebPACK with a Nexys4-DDR Board.
Question
party-pansen
Hi,
I had no Problem to program the qspi from Vivado by following the guide from the resource center. But that only gives me the hardware configuration. I also need to Program the Microblaze from the SDK. In previous projects with the ISE tool I used the iMPACT tool from Xilinx, but that doesn't seem to be available!?
What is the best and easiest way to do a full programming (hardware and microblaze software) from the SDK?
I am using the Vivado 2015.3 WebPACK with a Nexys4-DDR Board.
Thanks
party-pansen
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.