Hi. I just purchased the Analog Discovery 2 for my lab class but I need some assistance to setup the lab. My professor lab notes is based on a different logic analyzer and so I need some help to setup my lab. The professor gave me the configuration for the pattern generator but I can't figure how to access these setting on the Analog Discovery 2. Here are the settings for the pattern generator:
1) Configure output (channel 0) for high logic level and output(channel 1) for a clock. The beginning and end of the sequence is 0 and 1023
2) The maximum rate is 100MS/s (10ns per sample)
2) The clock frequency is 500kHz
3) The pattern generator channel 0 output set to +3.3V with a current up to 14mA.
I was able to set the clock frequency but how do I configure the other settings?
Question
Dave_123
Hi. I just purchased the Analog Discovery 2 for my lab class but I need some assistance to setup the lab. My professor lab notes is based on a different logic analyzer and so I need some help to setup my lab. The professor gave me the configuration for the pattern generator but I can't figure how to access these setting on the Analog Discovery 2. Here are the settings for the pattern generator:
1) Configure output (channel 0) for high logic level and output(channel 1) for a clock. The beginning and end of the sequence is 0 and 1023
2) The maximum rate is 100MS/s (10ns per sample)
2) The clock frequency is 500kHz
3) The pattern generator channel 0 output set to +3.3V with a current up to 14mA.
I was able to set the clock frequency but how do I configure the other settings?
Thanks
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.