jpeyron
-
Posts
5,826 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by jpeyron
-
-
Hi @M_VdM,
I have reached out to see if the next version of waveforms 2015 will fix the issue between the AD2, Waveforms 2015 and the Raspberry Pi 3. I will respond here when I have an answer to this question for you.
thank you,
Jon
-
Hi @johnwick101146,
Welcome to the forums! Glad to hear you are liking the AD2 Maker Bundle w/BNC adapter. If you had not see waveforms reference manuals then Here is the Waveforms 2015 reference manual and here is the Waveforms 2015 SDK reverence manual. Here is the resource page for the AD2.
Cheers,
Jon
-
-
Hi @sdenenberg,
Here is a link to the Pmod Male Right Angle 6-pin Header on our website.
cheers,
Jon
-
-
Hi @mikeo2600,
Glad to hear that they are helping! Welcome to the forum and do not hesitate to post a question. Have a great day.
cheers,
Jon
-
-
Hi @nkyparissas,
Welcome to the forums! Here is the resource page and Here is the github for the Nexys 4 ddr.
cheers,
Jon
-
Hi @hirayaku,
I am sorry that you have not received a response yet. This issue has been escalated. Hopefully they will be able to respond in the near future.
thank you,
Jon
-
Hi @hirayaku,
I have not seen this issue before. I have reached out to a more experience engineer about you issue. Hopefully you will get a response soon. I am sorry for the inconvience that this has caused.
thank you,
Jon
-
Hi @hirayaku,
I did a compare on the SDK log files between my project and yours.I attached my SDK log below. The major difference I found is at the begining of you log it states
4:42:35 INFO : Disconnected from the channel tcfchan#1.
and mine does not. Looking into tcf here looks like this is how the SDK communicates to the hardware. I believe that the reason you are having issues is that your project is in the Xilinx folder. I would suggest to use a different place for your project. Please let me know if this fixes your issues. Also have you tried running any of the projects from our github here?
cheers,
Jon
-
Hi @hirayaku,
I made your project the same in vivado as your block design. Exported the hardware including the bitstream and launched sdk. In sdk,I click on new application. I named it and hit next. Then I clicked on hello world template and finish. I next set up the serial terminal. I used tera term to connect as my serial terminal. It must be set to 115200 for the baud rate. I leave it set at the default settings for everything else. Next you click on program fpga in sdk. Next right click on the application you made and choose run as-> launch on hardware(system debugger). The word hello world should print in the serial terminal. I have attached screen shots of what i am talk about as well as a picture of the zybo. Make sure to have the mode JP5 set as shown. I also took screen shots of what the zybo should look like in the device manager.
cheers,
Jon
-
Hi @hirayaku,
Could you please post a screen shot of the block design in vivado and console messages and code in sdk as well. when you run what selection did you choose i.e. launch on hardware system debug? what version of vivado? what OS are you using?
cheers,
Jon
-
-
Hi Lawi,
I had our design engineer look at this issue and this sounds like there might be an issue with the Cmod A7. I have sent you a PM about what to do from here.
cheers,
Jon
-
Hi Lawi,
Another way to connect to the Cmod A7 and see it is through Digilents Adept 2(here). I have attached a screen shot of what Adept looks like when connected to the Cmod A7. Please download and attach a screen shot of whats Adept 2 see's with your Cmod A7 attached. Also have you tried using an externally powered usb hub?
cheers,
Jon
-
Hi Lawi,
What do you see in the device manager when the Cmod A7 is connected. I have attached a screen shot of what it looks like on my laptop. Just to clarify, does the Cmod A7 connect and then disconnects moments later? And without you removing the usb to micro b cable or moving the Cmod A7? Are you able to do the tutorial here?
cheers,
Jon
-
-
Hi Marius,
Unfortunately, I havent had a chance to worked with the AD-FMCOMMS-EBZ or GNURadio but this project sounds very interesting. Hopefully someone in the community will be able to give you some more insight on your project.
cheers,
Jon
-
Hi Marius,
The Nexys Video's FMC is a fully loaded LPC. If the Zedboard's FMC works then the Nexys Video's will as well. You should contact Analog Devices to ensure that the difference between the Artix 7 and the Arm core doesn't affect the compatibility with the AD-FMCOMMS-EBZ.
thank you,
Jon
-
Hi Andrew,
Welcome to the forums! Glad to hear that you got the AD2 and that you are thinking of using it for many different tasks!
cheers,
Jon
-
Welcome to the forums!
-
Andy,
I emailed you some information that should help with the set up of your software.
thank you,
Jon
Electronics Explorer Troubleshooting
in Test and Measurement
Posted
Hi @Jean-Marc Thouery,
Thank you for pointing this out to us. I have attached the schematic for the REV F and we have updated the wiki with the REF F and REV H schematics. To confirm you have tried using the non-operational EE board(without any the other EE board connected) on the computer that the operational EE board was on?
thank you,
Jon
Electronics Explorer_F_sch.pdf