JonD

I never see the window getting any larger for the height. I have tried clearing / stop / start but the window just always appears to be the same size. I would think that there should be some type of scroll bar or something that would show the remainder of whats being captured instead of being cut off.

Confused why the AD3 addin modules don't have protective cases. For example the analog.board for the AD2/3 has an open circuit board. I"m using the AD3 analog board for automotive diagnostics and want to be able to put this in a diagnostic bag. I don't have a 3d printer to make such a protective case. I would think students would damage these addin boards because there again is no protective case. There should be provided protective cases with the addin or available for purchase. This would make the products more durable. Including making potective case for the AD3 with rubber bumpers so that this scope can be used for automotive work.

Hi Attila, When I adjust the height it doesn't appear to do anything for the size of the window. It would be nice if there was vertical bar or the ability to page or get to the aquistions. Thank you Jon

Persistence when displaying multiple waveforms cuts off and displays only 5-7 waveforms. Is it possible so that it whatever buffer # is just saved in persistence so it displays all the waveforms maybe you can scroll or VCR buttons to navigate to get to more waveforms before they get cutoff? This would allow us to see more waveforms at a time vs the 5-7 waveforms that display and get cut off. Please see the attached picture of what happens. Thank you

Hi Attila, Was just wondering if you will be adding the custom equation and custom table probes that are mentioned in this thread. Thank you

Thank you Attila that did the trick.

HI Attila, This appears to only work when the capture mode is set to repeated. Was just wondering is there anyway the persistence can be done on a record wave form or a wave form that has been saved can it segment it. Probably asking for something that is not possible.

I'm outputting a 1KHz Sinewave from the wavegenerator and feeding into channel 1 of the scope. I then attempt to record to file and no matter what I do it converts the sinewave to a square wave and is not even the same amplitude. What am I doing wrong? This is what its doing to the wave file which is supposed to be a sinewave at a 1 volt scale. But look at what its doing Also whenever I try to use bin it never works it totally messes up the wave form as well. Also when I try the record option in WaveForms it only saves for 1 second and stops. Isn't it supposed to record for awhile. For example below when I select the record option it runs for a second and stops. what am I doing wrong.

Hi Attila, This is very neat and it works out nicely. Thank you for adding this.

Hi Attila That looks pretty awesome is the bottom wave a capture of 21 separate waveform stacked on top of one another. The option you show would be really nice and the perspective one below might be able to show more as its 3d.

Any word on possibly setting up a custom table for probes and equation as mentioned for Automotive Related Probe setups. For the four channel Eclypse Z7 it doesn't look like the plugs take regular scope leads they look coxial almost instead. Also any thought on implementing the various display types for seeing waves in a waterfall pattern to see defects fast.

Hi Attila, Is this a 4 channel oscilliscope for 589.00 is this what you were referring to does it run waveforms?

Hi Attila, For the segmented wave form display I don't believe the Wave forms does the following below: It would be neat to have perspective display mode. It would show any glitches for alot of waveforms at once.

Hi Attila, For the custom probes can you please the equation and custom tables that PicoScope use this would help setup custom probes. Custom Table: Custom Equation:

Custom Probes Needed in WaveForms I see that Automotive Measurements was added to Waveform which is really nice feature. I really think there needs to be custom probes option or to even download preconfigured probes from the Cloud. In Automotive there are a ton of different probes with different settings and the current software appears to be very limited. For example PicoScope allows for Custom Probes and to even to do a custom table for settings for probes. Also HScope allows to do custom probes. I wish there was labels that could be assigned to the custom probes as well. For Example how would I setup the PS16 pressure transducer from Rotkee Ukraine Company with current setup in Waveform. Segments Display I see that Rigol Scopes have the ability to do segmented display of wave forms or multiple wave forms stacked near each other. This would be an awesome feature to have in Wave Forms to see a bunch of wave forms at the same time. Peak Detect Is it possible to have it so that it can detect glitches like the Snap-on Scope Peak detect as well. Could something like this be built into the software. It seems like my Analog Discovery 3 has more capability then the Snap-on Scope M4 Versus Edge. 4 Channel Affordable Scope Is there any consideration for building an affordable 4 channel scope in the form factor of the Analog Discovery 3. A case for the Analog Discovery 3 breakout box that has two channel analog and wave form generator. I'm using this for automotive use and the breakout box that has the 2 channel scope and 2 channel waveforms is unprotected and you just see the circuit board. This is not friendly for automotive use at all. While it looks neat. I don't have a 3rd printer so I'm not able make my own.