JonD

Hi JColvin, What I mean is that there would be an option within Wave Forms in which you could upload the waveform to the cloud and that would be accessible to others via a direct link. and also there would be a library which you could upload the wave form to the cloud that would be accessible to other members. It would be nice to be able share automotive wave forms or even other wave forms with other diligent users in a library. Thank you Jon Dieter

In the future is it possible to share Waveforms with other members in the Cloud. It would be neat to be able to share waveforms with other users via Cloud Share this would be handy for sharing automotive waveforms. Or if there was a way to share a URL to the Cloud Storage for a waveform so it could be shared out in the community.

Can you please have it so in WaveForms we have Pass / Fail Masks on the Waveforms. For example, like the following below can something like this be setup in the software. From Rigol can this be created in WaveForms Benefits of Pass Fail measurements and how to set them up (site.com) Benefits of Pass Fail measurements and how to set them up Dec 11, 2019•Knowledge You can use Pass/Fail measurements for a number of applications. With Rigol scopes you can set it up to stop or continue when there is a failure or a pass, you can set the output to be the speaker or through the optically isolated output on the rear of several models or both, you can create masks with varying error budgets around a target signal, and you can even use the record mode to record all the failures as frames. In this way, you could set up a test over night, let it run, and come back and have all the failure states recorded for you. This procedure uses a DS1000Z series scopes and will be similar to other Rigol scopes: Push UTIL and then push PASS/FAIL. Set Enable to ON, automatically a mask will be created. To adjust the mask to the signal you want to test press the Range soft key and adjust the X Mask and Y MASK similar to the image below. The idea here is to design a space where the signal is not expected to enter. This space is represented by the blue background portion of the display. As X and Y is adjusted you will see the signal bracketed by a white border. When you are satisfied with the mask you have adjusted push the soft Create key. The resultant mask should look similar to this:

I never see the window getting any larger for the height. I have tried clearing / stop / start but the window just always appears to be the same size. I would think that there should be some type of scroll bar or something that would show the remainder of whats being captured instead of being cut off.

Confused why the AD3 addin modules don't have protective cases. For example the analog.board for the AD2/3 has an open circuit board. I"m using the AD3 analog board for automotive diagnostics and want to be able to put this in a diagnostic bag. I don't have a 3d printer to make such a protective case. I would think students would damage these addin boards because there again is no protective case. There should be provided protective cases with the addin or available for purchase. This would make the products more durable. Including making potective case for the AD3 with rubber bumpers so that this scope can be used for automotive work.

Hi Attila, When I adjust the height it doesn't appear to do anything for the size of the window. It would be nice if there was vertical bar or the ability to page or get to the aquistions. Thank you Jon

Persistence when displaying multiple waveforms cuts off and displays only 5-7 waveforms. Is it possible so that it whatever buffer # is just saved in persistence so it displays all the waveforms maybe you can scroll or VCR buttons to navigate to get to more waveforms before they get cutoff? This would allow us to see more waveforms at a time vs the 5-7 waveforms that display and get cut off. Please see the attached picture of what happens. Thank you

Hi Attila, Was just wondering if you will be adding the custom equation and custom table probes that are mentioned in this thread. Thank you

Thank you Attila that did the trick.

HI Attila, This appears to only work when the capture mode is set to repeated. Was just wondering is there anyway the persistence can be done on a record wave form or a wave form that has been saved can it segment it. Probably asking for something that is not possible.

I'm outputting a 1KHz Sinewave from the wavegenerator and feeding into channel 1 of the scope. I then attempt to record to file and no matter what I do it converts the sinewave to a square wave and is not even the same amplitude. What am I doing wrong? This is what its doing to the wave file which is supposed to be a sinewave at a 1 volt scale. But look at what its doing Also whenever I try to use bin it never works it totally messes up the wave form as well. Also when I try the record option in WaveForms it only saves for 1 second and stops. Isn't it supposed to record for awhile. For example below when I select the record option it runs for a second and stops. what am I doing wrong.

Hi Attila, This is very neat and it works out nicely. Thank you for adding this.

Hi Attila That looks pretty awesome is the bottom wave a capture of 21 separate waveform stacked on top of one another. The option you show would be really nice and the perspective one below might be able to show more as its 3d.

Any word on possibly setting up a custom table for probes and equation as mentioned for Automotive Related Probe setups. For the four channel Eclypse Z7 it doesn't look like the plugs take regular scope leads they look coxial almost instead. Also any thought on implementing the various display types for seeing waves in a waterfall pattern to see defects fast.

Hi Attila, Is this a 4 channel oscilliscope for 589.00 is this what you were referring to does it run waveforms?

Hi Attila, For the segmented wave form display I don't believe the Wave forms does the following below: It would be neat to have perspective display mode. It would show any glitches for alot of waveforms at once.

Hi Attila, For the custom probes can you please the equation and custom tables that PicoScope use this would help setup custom probes. Custom Table: Custom Equation:

Custom Probes Needed in WaveForms I see that Automotive Measurements was added to Waveform which is really nice feature. I really think there needs to be custom probes option or to even download preconfigured probes from the Cloud. In Automotive there are a ton of different probes with different settings and the current software appears to be very limited. For example PicoScope allows for Custom Probes and to even to do a custom table for settings for probes. Also HScope allows to do custom probes. I wish there was labels that could be assigned to the custom probes as well. For Example how would I setup the PS16 pressure transducer from Rotkee Ukraine Company with current setup in Waveform. Segments Display I see that Rigol Scopes have the ability to do segmented display of wave forms or multiple wave forms stacked near each other. This would be an awesome feature to have in Wave Forms to see a bunch of wave forms at the same time. Peak Detect Is it possible to have it so that it can detect glitches like the Snap-on Scope Peak detect as well. Could something like this be built into the software. It seems like my Analog Discovery 3 has more capability then the Snap-on Scope M4 Versus Edge. 4 Channel Affordable Scope Is there any consideration for building an affordable 4 channel scope in the form factor of the Analog Discovery 3. A case for the Analog Discovery 3 breakout box that has two channel analog and wave form generator. I'm using this for automotive use and the breakout box that has the 2 channel scope and 2 channel waveforms is unprotected and you just see the circuit board. This is not friendly for automotive use at all. While it looks neat. I don't have a 3rd printer so I'm not able make my own.

Hi Attila , I don't think that custom grids willl work at all. There is a vertical line for eah cylinder and its a resizeable overlay so you can drag it to top of peaks in waveform. Was just wondering if you have actually used the HScope demo to get a.feel for how this works.

If you have an Android Device such as a tablet or phone you could demo application HScope. This has rulers for 720 degree for compression and cylinder overlays.

Hi Attila, I'm not sure what you mean by adding a custom grid. The cylinder labels kind of act like a cursor overlay that can be automatically adjusted or resized. For example a 4 cylinder car wouldnhave four lines or one line per cylinder. Also it.should allow you to change the cylinder labels baes on firing order. For example firing order of a four cylinder might be 1,3,2,4. The 720 degree for compression is also an adjustable cursor that has degee markers for intake compression exhaust.

Hi Derek, I ended up going with an HS502 Oscilliscope.that. is.12 bit and.has rulers for 720 degree and cylinders. I'm just unsure if Digilent will pursue the auto.otive side it would.be.awesome.if.they did because its 14 bits and would probably produce excellent.wave.forms

Hi Atila, It would be nice if these were.defined as as overlays as the cursors have.no labels. For example for measuring.relative compresison on cars and trucks it would nice to have a 720 degree overlay. Also an overlay for cylinder labels that.would have configureable firing order. For example cylinder 1 3 2 4 These two features would make the Analog Discovery 3 very appealing.to the DIY mechanic and even mobile professional mechanics. Also having configureable probes for current clamps and.secomdary ignition would be awesome. You could reach an entire community for auto.diagnostics. I wish Waveforms had these features and I wish I had An Analog Discovery 3. Thank you JonD.

Does the Analog Discovery 2 & 3 have 14 bit hardware vertical resolution. Can the Analog Discovery do reference waveforms. Has anyone used Analog discovery for automotive diagnostics. Can it display cylinder labels. Can it do 720 degrees for compression measurements. Can you make your own custom probes in the software. Are square and sine waves noisy with Analog discovery.