Using Vivado 2016.4, after entering the tcl command "source ./create_project.tcl" I get
...# update_ip_catalog -rebuild
INFO: [IP_Flow 19-234] Refreshing IP repositories
WARNING: [IP_Flow 19-2406] Cannot identify part xc7a200tsbg484-1
ERROR: [IP_Flow 19-2232] Current project options are not valid, cannot get 'PROJECT_PARAM.PART'
WARNING: [IP_Flow 19-2406] Cannot identify part xc7a15ticsg324-1L
ERROR: [IP_Flow 19-2232] Current project options are not valid, cannot get 'PROJECT_PARAM.PART'
(etc.)
Using Vivado 2017.4, I get a lot farther. I clicked Generate Bitstream. While launching implementation run, I got a critical warning:
I found an answer (AR# 69645) on the Xilinx site related to the IP_Flow 19-4739 warning, but it wasn't helpful. There is indeed a file C:\Users\janko\Xilinx6\Arty-Z7-20-xadc\src\ip\xadc_wiz_0\xadc_wiz_0.xci (and nothing else) in that directory, but removing that file (as the AR suggests) doesn't help.
Question
Jan Kok
I tried to build the XADC example project using Arty-Z7-20-xadc-2016.4-2.zip , https://reference.digilentinc.com/learn/programmable-logic/tutorials/arty-z7-xadc-demo/start , and https://reference.digilentinc.com/learn/programmable-logic/tutorials/github-demos/start .
Using Vivado 2016.4, after entering the tcl command "source ./create_project.tcl" I get
...# update_ip_catalog -rebuild
INFO: [IP_Flow 19-234] Refreshing IP repositories
WARNING: [IP_Flow 19-2406] Cannot identify part xc7a200tsbg484-1
ERROR: [IP_Flow 19-2232] Current project options are not valid, cannot get 'PROJECT_PARAM.PART'
WARNING: [IP_Flow 19-2406] Cannot identify part xc7a15ticsg324-1L
ERROR: [IP_Flow 19-2232] Current project options are not valid, cannot get 'PROJECT_PARAM.PART'
(etc.)
Using Vivado 2017.4, I get a lot farther. I clicked Generate Bitstream. While launching implementation run, I got a critical warning:
[IP_Flow 19-4739] Writing uncustomized BOM file 'c:/Users/janko/Xilinx/Arty-Z7-20-xadc/src/ip/xadc_wiz_0/xadc_wiz_0.xml'
The build subsequently failed.
I found an answer (AR# 69645) on the Xilinx site related to the IP_Flow 19-4739 warning, but it wasn't helpful. There is indeed a file C:\Users\janko\Xilinx6\Arty-Z7-20-xadc\src\ip\xadc_wiz_0\xadc_wiz_0.xci (and nothing else) in that directory, but removing that file (as the AR suggests) doesn't help.
How can I build this example project?
Link to comment
Share on other sites
10 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.