SithRuoss Posted October 8, 2017 Share Posted October 8, 2017 Hello everybody,is the library of the PMOD OLED2 actually compatible with the Arduino UNO R3?Thank you for the information.best regardSithRuoss Link to comment Share on other sites More sharing options...
JColvin Posted October 9, 2017 Share Posted October 9, 2017 Hello @SithRuoss, Unfortunately, I suspect that the library for the Pmod OLED2 is not compatible with the Arduino Uno R3; it uses a plib.h library which does not play nicely in the Arduino IDE and also has a number of hard-coded optimizations for Digilent boards that are not easily changed (some of them I'm not even sure how you would change them, such as changing which pins the 8 parallel data pins are assigned to). I'm sorry I could not be of more help. Thanks, JColvin Link to comment Share on other sites More sharing options...
Cristian.Fatu Posted January 8, 2018 Share Posted January 8, 2018 As James answered, unfortunately you can't use the library as it is. For example, if you take a look in Oled2Driver.cpp, you will notice that it uses PIC32 register names. But maybe this library can be used as a starting point if you want to build your functionality. See how Microchip PMP (Parallel Master Port) is used and you canĀ build your own functionality to access OLED2. The library is rather complex, as it also implements character generator, some graphic directives. Still you can focus only on the part you are interested. Link to comment Share on other sites More sharing options...
Question
SithRuoss
Hello everybody,
is the library of the PMOD OLED2 actually compatible with the Arduino UNO R3?
Thank you for the information.
best regard
SithRuoss
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.