Burth Posted May 2, 2017 Share Posted May 2, 2017 Adept does not recognize cpld xc2c2 "initialization failed check connection try again" Shows current and signal the problem is that when running the adept program Link to comment Share on other sites More sharing options...
jpeyron Posted May 3, 2017 Share Posted May 3, 2017 Hi @Burth, Welcome to the forums! What OS are you running? If you are in Linux, were you root when you installed Runtime and Adept? Is this the Coolrunner II? If so, you need to make sure to have the JP2 set to reg as shown on the attached picture. If i did not have JP2 jumpered correctly Adept did not see the CPLD XC2C2 as shown below and like you are describing. If this is not the case change out the cable you are using. cheers, Jon coolrunnerII.zip Link to comment Share on other sites More sharing options...
Question
Burth
Adept does not recognize cpld xc2c2 "initialization failed check connection try again"Shows current and signal the problem is that when running the adept programLink to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.