Filter Availability in QuickDAQ Software?

[rakeshaashay]

Could you please confirm, whether QuickDAQ Software includes CFC 60,180,600,and 1000 Filters.

as per compliant with SAE J211 and ISO 6487 Norms.

[rakeshaashay]

How to set these filters in Quick DAQ

[DAQman]

The Filter configuration can be found on the Configuration menu, assuming you have purchased the Advanced FFT Option. There is no CFC filter selection, per se. The Filter Configuration allows for Butterworth, Bessel, and Chebyshev filters. You can set the number of poles and the cutoff frequency. You could come close to a CFC filter using a 4-pole Butterworth with the appropriate cutoff and sample rate. However, there is no phase compensation.

 

 

[rakeshaashay]

how to select 4 pole for butterworth. how to select stop dampling ?

How to select CFC60 parameters in Quickdaq. pls give example for following :

[DAQman]

QuickDAQ does not have CFC filters. However, you can use the Digital Filter Configuration selection under the QuickDAQ Configuration menu to configure a low-pass filter. It can be set for Butterworth, 4-pole, 100 Hz, 3dB cutoff, but there is no setting for Stop Band. 

[rakeshaashay]

These CFC Filters are available with NI's Labview.

So can we communicate DT9837A with Labview and apply these filters.