Using Pmod USB to UART module

[swarnava]

Hi,

I'm using Deca Max10board which has 46 pin BBB expansion header. As my board doesn't have an USB to UART module so I got a PMOD USB to UART for data transfer. Can I directly connect the Pmod module to the BBB expansion header or do I need some other connector to connect the pmod module to BBB expansion header ? Can anyone help me with this ?

Thanks,

Swarnava Pramanik 

[D@n]

You'll need to do a bit of wiring to get it right, but ... it sure looks like it should work.

Dan

[swarnava]

Hi Dan,

Thanks for your reply. Could you please kindly let me kind of wiring are you talking about ? I connected the gnd pin of the Pmod module with a wire and connected the wire to the header pin on the FPGA board which is connected to ground. 

Thanks,

Swarnava Pramanik

[jpeyron]

Hi Swarnava,

Here is the reference manual for the PmodUSBUART which has a pin out discription table that should help you with your wiring.

thank you,

Jon