I have an analog discovery with the 2015 firmware, 3.2.6 on a 64bit machine.
I need to trigger on a waveform(a good solid edge, like a reset deassert), then zoom in on a glitch about 450ms post trigger. By "zoom in" I mean expand the timebase so I can see the nature of the glitch. With the single timebase setting, there is inadequate granularity to see what might be going on. See attached pic.
Can analog discovery do this? If so, how?
if a different product is needed, please suggest it.
Question
twilkers
Hi,
I have an analog discovery with the 2015 firmware, 3.2.6 on a 64bit machine.
I need to trigger on a waveform(a good solid edge, like a reset deassert), then zoom in on a glitch about 450ms post trigger. By "zoom in" I mean expand the timebase so I can see the nature of the glitch. With the single timebase setting, there is inadequate granularity to see what might be going on. See attached pic.
Can analog discovery do this? If so, how?
if a different product is needed, please suggest it.
thanks,
tim
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.