Is the JTAG-SMT2: Surface-mount Programming Module compatible with the Versal ACAP

[Joe306]

Hello, can you please tell me if the JTAG-SMT2: Surface-mount Programming Module is compatible with the Versal ACAP?

I will include my schematic for your review?

VIB_Mods 50.pdf

[JColvin]

Hi @Joe306,

Xilinx/AMD curated and provided the following list of target devices that is supported by the JTAG SMT2, which does include the Versal ACAP: https://digilent.com/reference/programmers/jtag-smt2/reference-manual#supported_target_devices.

As for your schematic, I don't see anything problematic. Your ESD diode based on its datasheet has low enough capacitance to not interfere with USB communication and it looks like you have appropriate protection for any in-rush current coming in on the USB., and otherwise more or less matches the example layout shown in Figure 12 in the Reference Manual, https://digilent.com/reference/programmers/jtag-smt2/reference-manual#application_examples.

Let me know if you have any questions.

Thanks,
JColvin

[Joe306]

Hello and thank you for responding to my post.  My operating system does not recognize the programming module. Is there a device driver that I need to download and install? Do I need any pull-up resistors on TDO, TCK, TMS and TDI?

Edited February 20 by Joe306