Basys3 autoconnect on Vivado 2023

[taitashaw]

Please how do I resolve basys3 board connection? It connects to server but doesn't connect to board as seen in the attached. Also I'm working with Vitis HLS as replacement to Vivado HLS and had some difficulties with the workflow as seen in the attached.

[JColvin]

Hi @taitashaw,

I haven't worked with HLS specifically, but the troubleshooting steps for getting the Basys 3 successfully detected by the Vivado software is explained in more detail in this thread here:

As for the 2023.2 differences in terms of the flow differences between this and previous versions (since Digilent's guide for setting up a basic project with Vivado and Vitis is based on 2023.1 and earlier) I would recommend checking out Adam Taylor's post on the differences between the flow here: https://www.adiuvoengineering.com/post/microzed-chronicles-introducing-vitis-unified-ide.

Let me know how it goes for you.

Thanks,
JColvin

[taitashaw]

Hi JColvin,

Thanks for the reply.

The device manager shows the USB connection (port COM 10) as seen in the attached but still not showing the basys3 connected to program device on Vivado 2023.

Please help.

Thanks,

John Bagshaw

[JColvin]

Hi @taitashaw,

Does the Basys 3 show up as a USB Serial Converter A and USB Serial Converter B with a Bus Reported Device Description of Adept USB Device in its Properties under the Universal Serial Bus Controllers dropdown?

Thanks,
JColvin

[taitashaw]

Hi @JColvin

It simply shows up as seen above - USB Serial Port (COM10)

Thanks,

John Bagshaw

[JColvin]

HI @taitashaw,

I have sent you a PM with some instructions.

Thanks,
JColvin