ADP5250 not detected in Waveforms on Linux

[chip]

Hi,

I have an ADP5250 that is not being detected in Waveforms on Linux. I have tried reinstalling both the Adept drivers and Waveforms.

The device works fine on Windows, so I don't think the ADP5250 is to blame. Also, when I plug in an old Analog Discover 2 on the same Linux machine, it also works fine. It seems to be only the combination of ADP5250 + Linux that is not working.

Of interest may be the dmesg output. For the ADP5250, there's no FTDI driver loaded:

[  334.940312] usb 5-2: USB disconnect, device number 4
[  356.999821] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[  357.160800] usb 3-1: New USB device found, idVendor=3923, idProduct=7ab9, bcdDevice= 0.00
[  357.160810] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[  357.160814] usb 3-1: Product: Digilent ADP5250
[  357.160817] usb 3-1: Manufacturer: Digilent
[  357.160820] usb 3-1: SerialNumber: 324168C
[  357.172749] hid-generic 0003:3923:7AB9.0008: hiddev0,hidraw3: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input0
[  357.179669] hid-generic 0003:3923:7AB9.0009: hiddev1,hidraw4: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input1
[  357.186683] hid-generic 0003:3923:7AB9.000A: hiddev2,hidraw5: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input2
[  357.193639] hid-generic 0003:3923:7AB9.000B: hiddev3,hidraw6: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input3

But for the AD2, it recognizes the FDTI USB chip:

[ 1044.325237] usb 5-2: new high-speed USB device number 5 using xhci_hcd
[ 1044.478011] usb 5-2: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
[ 1044.478017] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1044.478020] usb 5-2: Product: Digilent USB Device
[ 1044.478023] usb 5-2: Manufacturer: Digilent
[ 1044.478025] usb 5-2: SerialNumber: 210321B0E513
[ 1044.480451] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected
[ 1044.480481] usb 5-2: Detected FT232H
[ 1044.480813] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB2
[ 1044.693832] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 1044.693859] ftdi_sio 5-2:1.0: device disconnected

Any help is appreciated.

Thanks.

[attila]

Hi @chip

Unfortunately the ADP5250 is Windows only.
https://digilent.com/shop/analog-discovery-pro-adp5250-all-in-one-1gs-s-100mhz-mixed-signal-oscilloscope-function-generator-power-supply-and-dmm/

[chip]

Thanks @attila. Is there a plan to support it in the future?

Edited September 28, 2022 by chip

[attila]

Hi @chip

Unfortunately, no.