chip

Thanks @attila. Is there a plan to support it in the future?

Hi, I have an ADP5250 that is not being detected in Waveforms on Linux. I have tried reinstalling both the Adept drivers and Waveforms. The device works fine on Windows, so I don't think the ADP5250 is to blame. Also, when I plug in an old Analog Discover 2 on the same Linux machine, it also works fine. It seems to be only the combination of ADP5250 + Linux that is not working. Of interest may be the dmesg output. For the ADP5250, there's no FTDI driver loaded: [ 334.940312] usb 5-2: USB disconnect, device number 4 [ 356.999821] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 357.160800] usb 3-1: New USB device found, idVendor=3923, idProduct=7ab9, bcdDevice= 0.00 [ 357.160810] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 357.160814] usb 3-1: Product: Digilent ADP5250 [ 357.160817] usb 3-1: Manufacturer: Digilent [ 357.160820] usb 3-1: SerialNumber: 324168C [ 357.172749] hid-generic 0003:3923:7AB9.0008: hiddev0,hidraw3: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input0 [ 357.179669] hid-generic 0003:3923:7AB9.0009: hiddev1,hidraw4: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input1 [ 357.186683] hid-generic 0003:3923:7AB9.000A: hiddev2,hidraw5: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input2 [ 357.193639] hid-generic 0003:3923:7AB9.000B: hiddev3,hidraw6: USB HID v1.01 Device [Digilent Digilent ADP5250] on usb-0000:08:00.3-1/input3 But for the AD2, it recognizes the FDTI USB chip: [ 1044.325237] usb 5-2: new high-speed USB device number 5 using xhci_hcd [ 1044.478011] usb 5-2: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00 [ 1044.478017] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1044.478020] usb 5-2: Product: Digilent USB Device [ 1044.478023] usb 5-2: Manufacturer: Digilent [ 1044.478025] usb 5-2: SerialNumber: 210321B0E513 [ 1044.480451] ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected [ 1044.480481] usb 5-2: Detected FT232H [ 1044.480813] usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB2 [ 1044.693832] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2 [ 1044.693859] ftdi_sio 5-2:1.0: device disconnected Any help is appreciated. Thanks.