Any PMOD camera kits

[tnkumar]

The only one I could locate is https://www.avnet.com/shop/us/products/avnet-engineering-services/aes-pmod-tdm114-g-3074457345635221608?autoSuggestSearchTerm=pmod camera and it is not available

What other cameras can I use and is there some other interface through which I connect it to the Arty S7-50?

Regards.

- Kumar

[JColvin]

Hi @tnkumar,

Unfortunately, I don't have any suggestions that Digilent knows to be working with the Arty S7 boards.

Thanks,
JColvin

[thinkthinkthink]

You can get an OV7670 camera module and some MTE cables and connect them to Pmod ports. Just be aware that you'll need maybe 2 or 3 Pmod ports for one camera module. I've managed to pull it off on the old ZYBO board.

Edited December 15, 2021 by thinkthinkthink

[tnkumar]

13 hours ago, thinkthinkthink said:

You can get an OV7670 camera module and some MTE cables and connect them to Pmod ports. Just be aware that you'll need maybe 2 or 3 Pmod ports for one camera module. I've managed to pull it off on the old ZYBO board.

Thanks @thinkthinkthink. Do you have the details of how you got this to work with 2 or 3 PMOD ports, even though it was with the ZYBO board? What are MTE cables?

[tnkumar]

10 minutes ago, tnkumar said:

Thanks @thinkthinkthink. Do you have the details of how you got this to work with 2 or 3 PMOD ports, even though it was with the ZYBO board? What are MTE cables?

Can something like this https://www.amazon.com/dp/B07XKTD7QN?psc=1&smid=A1D0D0TVUQPH3R&ref_=chk_typ_imgToDp be connected to an FPGA board based on what you suggest? @thinkthinkthink

[thinkthinkthink]

Yeah those camera modules look about right. This is how I did it on the old ZYBO board: Piping OV7670 video to VGA output on ZYBO.

[tnkumar]

5 hours ago, thinkthinkthink said:

Yeah those camera modules look about right. This is how I did it on the old ZYBO board: Piping OV7670 video to VGA output on ZYBO.

Thanks @thinkthinkthink - I will check the blogspot