I have students trying to use MSI down counters in multisim, and programming them to the CMOD S6. In simulation, we aren't experiencing any ripple issues, but when we transfer to the CMOD S6, the counters reset at 0111 instead of waiting until 1111. I've attached the multisim file. We've tried putting a series of inverters on one of the outputs of the counter to see if it would "slow" the bit enough to prevent the trigger, but it doesn't really seem to be working. Any assistance would be greatly appreciated! Thanks!
Question
Mkarasch
Hello!
I have students trying to use MSI down counters in multisim, and programming them to the CMOD S6. In simulation, we aren't experiencing any ripple issues, but when we transfer to the CMOD S6, the counters reset at 0111 instead of waiting until 1111. I've attached the multisim file. We've tried putting a series of inverters on one of the outputs of the counter to see if it would "slow" the bit enough to prevent the trigger, but it doesn't really seem to be working. Any assistance would be greatly appreciated! Thanks!
RippleIssue.ms12
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.