aparna Posted July 11, 2019 Share Posted July 11, 2019 how to program pro mx7 from pickit3 programmer And for pro mx7 instead of MPLAB another software can be used or not Link to comment Share on other sites More sharing options...
Larry Standage Posted July 11, 2019 Share Posted July 11, 2019 The PICkit 3 (or PKOB on Pro MX7) can only be used, in general, with MPLAB and MPLAB X. The Pro MX7 has a number of options: MPIDE UECIDE (https://www.uecide.org) PlatformIO (https://platformio.org) Arduino IDE with either: the Digilent Core (https://reference.digilentinc.com/learn/software/tutorials/digilent-core-install/start) the chipKIT Core (https://chipkit.net/wiki/index.php?title=ChipKIT_core) Link to comment Share on other sites More sharing options...
aparna Posted July 15, 2019 Author Share Posted July 15, 2019 Is there any ethernet code (UDP) for PRO MX7? Link to comment Share on other sites More sharing options...
jpeyron Posted July 15, 2019 Share Posted July 15, 2019 Hi @aparna, The UDPEchoServer and UDPEchoClient in the Digilent Core were made for the MX7cK which was re-branded to be the Pro MX7. Best regards, Jon Link to comment Share on other sites More sharing options...
aparna Posted July 16, 2019 Author Share Posted July 16, 2019 in pro mx7, ethernet is not pining. What is the reason and how to solve that issue? Link to comment Share on other sites More sharing options...
jpeyron Posted July 16, 2019 Share Posted July 16, 2019 Hi @aparna, Are you using the Adruino/digilent core? arduino chipkit core? what sketch are you using if you are using arduino? Please attach screen shot of IDE. Are you getting any errors? best regards, Jon Link to comment Share on other sites More sharing options...
aparna Posted July 17, 2019 Author Share Posted July 17, 2019 I am not using arduino. By using MPLAB or Mikroc pro for pic32 is using. No errors are coming. Link to comment Share on other sites More sharing options...
jpeyron Posted July 17, 2019 Share Posted July 17, 2019 Hi @aparna, Here is the Pro MX 7's resource center. We do have some older material for using MPLAB with the Pro MX 7 on the Digilent learn site here , but nothing related to mplab and ethernet. Its my understanding that Microchips's Harmony works with the Pro MX 7. Are you using Harmony? best regards, Jon Link to comment Share on other sites More sharing options...
Cristian.Fatu Posted August 1, 2019 Share Posted August 1, 2019 In the context of your initial question, I have built a simple MPLABX project for Pro MX7 board that just blinks a LED. I used Pickit3 connected to JP17. Please note the ICESEL pragma config. Good luck, Cristian Fatu Blink_MX7.X.zip Link to comment Share on other sites More sharing options...
Question
aparna
how to program pro mx7 from pickit3 programmer And for pro mx7 instead of MPLAB another software can be used or not
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.