Arty7_Lover Posted July 3, 2019 Share Posted July 3, 2019 Which DDR memory can I select in Zynq ? In Arty z7-20, DDR memory is 512MBytes, 16bit, 1050 Mbps. In Vivado IPI zynq, Which parts can I select in fictures (file to be attached ) Link to comment Share on other sites More sharing options...
jpeyron Posted July 3, 2019 Share Posted July 3, 2019 Hi @Arty7_Lover, The digilent board files correctly configure the ZYNQ processor. When installed correctly they become the default setting when running block automation. I have attached screen shots of the part we are using. best regards, Jon Link to comment Share on other sites More sharing options...
Arty7_Lover Posted July 3, 2019 Author Share Posted July 3, 2019 My Arty z7-20 have micron 7EP47 D9SHD. I should have a datasheet of it or part number because I have to know about it. I can not find 7EP47 in web. Is it MT41J256M16 RE-125? And If I press Preset defaults to make a Arty z7-20 project in Vivado to be installed Arty z7-20, I see MT41J128M8JP-125. It is 512Mb. ( Arty z7-20 have 4Gb) So , I think that there is some problems in defaults memory Parts Selections. I want to know which parts selection of DDR. Zedboard is MTJ128M16HA-15E If I select preset to Zedboard. I want to have wright memory (perhaps,MT41J256M16 RE-125 and configuration information in menu) to preset Arty z7-20. Link to comment Share on other sites More sharing options...
jpeyron Posted July 3, 2019 Share Posted July 3, 2019 Hi @Arty7_Lover, We responded to your other thread here. best regards, Jon Link to comment Share on other sites More sharing options...
Question
Arty7_Lover
Which DDR memory can I select in Zynq ?
In Arty z7-20, DDR memory is 512MBytes, 16bit, 1050 Mbps.
In Vivado IPI zynq, Which parts can I select in fictures (file to be attached )
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.