akash Posted March 4, 2019 Share Posted March 4, 2019 I would like to know how to use the clocks in my programming. ( precisely, to which pin of the board the clock is attached?), so I can generate PWM signals using Multisim platform. Link to comment Share on other sites More sharing options...
Cristian.Fatu Posted March 4, 2019 Share Posted March 4, 2019 Hello, I can't give you more details about Multisim, still your question seems to me to be independent to Multisim. You should take a look in the constraints file (xdc) which is specific to each board. Here you can find more details about Vivado constraint files. Here you can find the Nexys 4 DDR constraint file. Please tell me if I can give you more details. Link to comment Share on other sites More sharing options...
akash Posted May 24, 2019 Author Share Posted May 24, 2019 Can I drag and drop the 100MHz clock signal from the E3 pin of the digilent Nexys 4 DDR board to the PLD design? Is there an example program (like led blink) using PLD design? Is there a way to interface the Pmods in the PLD design? Link to comment Share on other sites More sharing options...
jpeyron Posted May 24, 2019 Share Posted May 24, 2019 Hi @akash, Here is the Nexys 4 DDR Music Looper. This demo uses the clock wizard and HDL. best regards, Jon Link to comment Share on other sites More sharing options...
Question
akash
I would like to know how to use the clocks in my programming. ( precisely, to which pin of the board the clock is attached?), so I can generate PWM signals using Multisim platform.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.