lowuze Posted December 21, 2018 Share Posted December 21, 2018 Hello! I have the following question. Is it possible to read Zynq temperature via XADC when working with Digilent Linux distro on PYNQ-Z1 board? Thanks! Link to comment Share on other sites More sharing options...
jpeyron Posted December 31, 2018 Share Posted December 31, 2018 Hi @lowuze, Sorry for the late response. I have reached out to more experience embedded linux engineers about your question. thank you, Jon Link to comment Share on other sites More sharing options...
Ciprian Posted January 7, 2019 Share Posted January 7, 2019 Hi @lowuze, As far as I know there is no Digilent Linux for PYNQ, we however have Petalinux for Arty Z7-20 which is similar to the PYNQ(Arty does not have a Microphone), it has by default XADC capabilities activated (driver in the kernel and configured device tree). Unfortunately we do not have a example project on how to read the XADC from Linux but you can access it in: /sys/bus/iio/devices/iio:device0 For more information about how to use it please search for Xilinx XADC on linux, THIS might also give you a better understanding on how the driver works and how to interface with it. -Ciprian Link to comment Share on other sites More sharing options...
Question
lowuze
Hello!
I have the following question. Is it possible to read Zynq temperature via XADC when working with Digilent Linux distro on PYNQ-Z1 board?
Thanks!
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.