When i connect the Shield to my Arduino UNO one samples needs about 10 microseconds witch should be right.
Instead if i connect it to the chipKit uc32 it takes about a 150 microseconds.
I guess the SPI communication is not working properly but i dont know why.
Since i dont know wether the board is the retired version or the newest i thought it might not work if its the old one.
Did anybody else have a similar problem or is there a way to find out wether my uc32 is the old or new revision.
Thx in advance
Edit:
I solved the problem.
Instead of using the Arduino IDE i switched to MPIDE. Now it works with a sample rate of 1sample / 25 microseconds.
There might be a problem with the Additional Board Manager URL for the Arduino IDE. I might take a look at it if i have the time.
Question
TCTeis
Hello,
i am having trouble using the chipkit uc32 together with the analog shield here : https://store.digilentinc.com/analog-shield-high-performance-add-on-board-for-the-arduino-uno-retired/
When i connect the Shield to my Arduino UNO one samples needs about 10 microseconds witch should be right.
Instead if i connect it to the chipKit uc32 it takes about a 150 microseconds.
I guess the SPI communication is not working properly but i dont know why.
Since i dont know wether the board is the retired version or the newest i thought it might not work if its the old one.
Did anybody else have a similar problem or is there a way to find out wether my uc32 is the old or new revision.
Thx in advance
Edit:
I solved the problem.
Instead of using the Arduino IDE i switched to MPIDE. Now it works with a sample rate of 1sample / 25 microseconds.
There might be a problem with the Additional Board Manager URL for the Arduino IDE. I might take a look at it if i have the time.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.