rpickeri Posted June 6, 2018 Posted June 6, 2018 I have placed the images BOOT.BIN and image.ub into a fat32 formatted micro sd card, set the jumper to boot from sd, and power cycled the card, opened a serial port session 115200 8n1, and pressed the reset button. Nothing happens. Where do I go to get technical support for this?
JColvin Posted June 8, 2018 Posted June 8, 2018 Hi @rpickeri, As a confirmation, you have a successfully booting petalinux project after the clean install from your other thread here? Thanks, JColvin
rpickeri Posted June 15, 2018 Author Posted June 15, 2018 I confirm that I have successfully booted from the SD card. It seems the problem has been traced down to a faulty micro SD card.
Question
rpickeri
I have placed the images BOOT.BIN and image.ub into a fat32 formatted micro sd card, set the jumper to boot from sd, and power cycled the card, opened a serial port session 115200 8n1, and pressed the reset button.
Nothing happens.
Where do I go to get technical support for this?
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.