VladimirT

Hello everyone! I'm trying to boot PetaLinux with a GUI to run my QML application. The board is connected to my FHD display via HDMI, and the display color depth is 24, but fbset shows 32 in PetaLinux. This is a part of my devicetree_config file: &amba_pl { digilent_hdmi { compatible = "digilent,hdmi"; clocks = <&axi_dynclk_0>; clock-names = "clk"; digilent,edid-i2c = <&i2c0>; digilent,fmax = <150000>; port@0 { hdmi_ep: endpoint { remote-endpoint = <&pl_disp_ep>; }; }; }; xlnx_pl_disp { compatible = "xlnx,pl-disp"; dmas = <&axi_vdma_1 0>; dma-names = "dma0"; /* * See Documentation/devicetree/bindings/dma/xilinx/xilinx_frmbuf.txt * to find the equivalent DRM fourcc code for the format selected in * the Frame Buffer Reader, then see See include/uapi/drm/drm_fourcc.h * to find the corresponding 4-char string that should be placed here. */ xlnx,vformat = "XR24"; xlnx,bridge = <&v_tc_out>; port@0 { pl_disp_ep: endpoint { remote-endpoint = <&hdmi_ep>; }; }; }; }; I have installed Qt, Matchbox, and X11 packages. After booting, I faced a color issue even before the QML app was running. I tried to change the color depth in Xorg and adjust the fbset display parameters, but received an "FBSET INVALID ARGUMENT" error. I also tried to change the xlnx and vformat mode; after making changes and completely rebuilding, there was no video output at all. However, I finally found that axi_vdma outputs not RGB but BGR color scheme, which might be the reason for the issue. This is my fbset output: mode "1920x1080-0" #D: 0.000 MHz, H: 0.000 kHz, V: 0.000 Hz geometry 1920 1080 1920 2160 32 timings 0 0 0 0 0 0 0 accel true rgba 8/16,8/8,8/0,0/0 endmode Adding custom parameters such as depth and timings to `/etc/fb.modes` is not helping. PetaLinux 2022.1 or 2020.1, Ubuntu 18.04, Digilent Zybo Z7. BSP, hardware and OS configs from oficial Digilent repository. Any ideas?