410-317 Smart Display dimensions or model

[JBass]

I am trying to locate dimensions and/or a 3D model of the 410-317 multi-touch display shield. I am designing a panel this will go into so I need to understand the overall dimensions when stacked with an Arduino. This information wasn't on the website or datasheet.

[JColvin]

Hi @JBass,

Unfortunately, we do not have a 3D model available for the Multi-touch display shield. I took some measurements with a digital caliper though, if that will help you.

Width of PCB: 2.1 inches
Length of PCB: 2.7 inches
Length of whole board (including extra distance from jumper JP1 and the curved wiring for the display) : 2.95 inches
Width of whole board: 2.1 inches
Height of board when fully placed on an Arduino: 0.46 inches

Let me know if you have any other questions.

Thanks,
JColvin

[JBass]

On ‎4‎/‎27‎/‎2018 at 2:07 PM, JColvin said:

Hi @JBass,

Unfortunately, we do not have a 3D model available for the Multi-touch display shield. I took some measurements with a digital caliper though, if that will help you.

Width of PCB: 2.1 inches
Length of PCB: 2.7 inches
Length of whole board (including extra distance from jumper JP1 and the curved wiring for the display) : 2.95 inches
Width of whole board: 2.1 inches
Height of board when fully placed on an Arduino: 0.46 inches

Let me know if you have any other questions.

Thanks,
JColvin

Thanks. That will give me what I need .