rrh Posted April 10, 2018 Share Posted April 10, 2018 I'm trying to build the Arty-Z7-20 petalinux project version 2017.4 but it keeps failing because off: libuio-1.0-r0 do_fetch libgpio-1.0-r0 do_fetch libpwm-1.0-r0 do_fetch gpiotil-1.0-r0 do_fetch pwmdemo-1.0-r0 do_fetch failing, because the connection times out, is there a way to bypass this? Link to comment Share on other sites More sharing options...
sbobrowicz Posted April 12, 2018 Share Posted April 12, 2018 A couple of questions: 1) are you connected to the internet? Petalinux requires internet access to work properly. You can usually figure out a workaround if you are on a computer that can't access the internet, but it takes work. 2) How did you obtain the project? Are you cloning it using git or did you download a release BSP? If you are using a BSP, which version are you using? 3)If you are cloning the project, try to do a "git pull", and perhaps a: git submodule update --recursive --remote A recent commit that changed where the digilent-apps recipes point may be the culprit. After doing these git commands, make sure to do the following to clean your project: petalinux-build -x distclean petalinux-build -x mrproper You may also need to delete the entire components folder if the build fails on the FSBL (it will automatically regenerate the folder during build). Link to comment Share on other sites More sharing options...
rrh Posted April 13, 2018 Author Share Posted April 13, 2018 I did: git clone --recurse-submodules https://github.com/Digilent/Petalinux-Arty-Z7-20 I'm using version 2017.4 as said in the first post. And a petalinux-build command after that, which failed (I have a working internet connection, and I'm using Ubuntu 16.04 as OS). I now deleted the components folder and am trying: petalinux-build -x distclean petalinux-build -x mrproper I will report back with my results Link to comment Share on other sites More sharing options...
rrh Posted April 13, 2018 Author Share Posted April 13, 2018 Still the same problem, unfortunately Link to comment Share on other sites More sharing options...
rrh Posted April 13, 2018 Author Share Posted April 13, 2018 Apparently the problem was in github. Using git config --global url."https://".insteadOf git:// Seems to fix the issue. I had already modified the problematic .bb files by hand in a previous attempt, but then it didn´t work Link to comment Share on other sites More sharing options...
sbobrowicz Posted April 13, 2018 Share Posted April 13, 2018 Great, glad to hear it is working Link to comment Share on other sites More sharing options...
Question
rrh
I'm trying to build the Arty-Z7-20 petalinux project version 2017.4 but it keeps failing because off:
libuio-1.0-r0 do_fetch
libgpio-1.0-r0 do_fetch
libpwm-1.0-r0 do_fetch
gpiotil-1.0-r0 do_fetch
pwmdemo-1.0-r0 do_fetch
failing, because the connection times out, is there a way to bypass this?
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.