llonllon Posted February 23, 2018 Share Posted February 23, 2018 I would like to know if in Arduino Ide with a chipkit wifire board is possible to configure the serial port with 8E1 (8 Stop bits, Even parity, 1 Stop bit) Serial.begin(9600,8N1) compile ok, but does not work Link to comment Share on other sites More sharing options...
JColvin Posted February 23, 2018 Share Posted February 23, 2018 Hi @llonllon, I'm not sure if it is possible with the Digilent made boards. I was only able to get the Serial.begin(9600, SERIAL_8N1) to successfully compile for an Arduino Uno; I wasn't able to get anything to compile for any Digilent boards and couldn't find anything in the libraries to indicate the Serial.begin(speed, configure) function was available, so I'm surprised you got the Serial.begin(9600,8N1) to compile. I looked around for a bit online and the only definitive working thing that I could find to get this working was to configure the serial manually as described in this thread here: http://forum.gadgetfactory.net/topic/2039-unable-to-configure-serial-through-serialbegin-properly/ Thanks, JColvin Link to comment Share on other sites More sharing options...
Question
llonllon
I would like to know if in Arduino Ide with a chipkit wifire board is possible to configure the serial port with 8E1 (8 Stop bits, Even parity, 1 Stop bit)
Serial.begin(9600,8N1) compile ok, but does not work
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.