I had a question about writing to flash on the Arty board. Issues I am running into are that after following the Tutorial on how to write to the Micron Serial NOR Flash the program doesn't run after a power cycle. It runs after a soft reset, ie pushing the reset button on the arty board, but not after a power cycle. The only luck ive had is flashing a simple hello world program that just has the print statement in a while(1) loop but when I try to put the echo_server example it will not boot up from the flash it just gets stuck.
Any and all help/comments are appreciated please let me know what I could be doing wrong.
Question
bdina77
Hello All,
I had a question about writing to flash on the Arty board. Issues I am running into are that after following the Tutorial on how to write to the Micron Serial NOR Flash the program doesn't run after a power cycle. It runs after a soft reset, ie pushing the reset button on the arty board, but not after a power cycle. The only luck ive had is flashing a simple hello world program that just has the print statement in a while(1) loop but when I try to put the echo_server example it will not boot up from the flash it just gets stuck.
Any and all help/comments are appreciated please let me know what I could be doing wrong.
bdina77
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.