Jump to content

I'm gonna need help...


Recommended Posts

I'm a LabVIEW guy and new to this forum. The cRIO and sbRIOs I've worked with have input/output constraints, so I want to figure out how to work with the Zynq and build a ridiculously fast vision system to drive a fairly simple motion platform. Will start with the Zybo Z7 and work up from there. I've done simple embedded systems before and messed around with verilog on an inexpensive (but capable) development board. Vivado is a bit scary. 

Link to comment
Share on other sites

Hi @Rockytop,

Welcome to our Forums!

Those of us here on the Forum don't have a ton of experience with LabVIEW and using the cRIO and sbRIO, so if you have questions with those, you may want to post your question on the LabVIEW Forums (https://forums.ni.com/t5/LabVIEW/bd-p/170) for better support.

If you have any questions on using Vivado with our Zybo Z7 though, feel free to post them on our FPGA Forum.


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...