my Nexys 3 board can't be detected by Adept software anymore. USB vendor and product id's are changed to one from cypress.
>lsusb
ID 04b4:8613 Cypress Semiconductor Corp. CY7C68013 EZ-USB FX2 USB 2.0 Development Kit
>dmesg
[19117.713321] usb 5-2: new high-speed USB device number 4 using xhci_hcd
[19117.897349] usb 5-2: New USB device found, idVendor=04b4, idProduct=8613
[19117.897352] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[19117.897724] usbtest 5-2:1.0: FX2 device
[19117.897728] usbtest 5-2:1.0: high-speed {control bulk-in bulk-out} tests (+alt)
Question
niko
Hi,
my Nexys 3 board can't be detected by Adept software anymore. USB vendor and product id's are changed to one from cypress.
>lsusb ID 04b4:8613 Cypress Semiconductor Corp. CY7C68013 EZ-USB FX2 USB 2.0 Development Kit
>dmesg [19117.713321] usb 5-2: new high-speed USB device number 4 using xhci_hcd [19117.897349] usb 5-2: New USB device found, idVendor=04b4, idProduct=8613 [19117.897352] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [19117.897724] usbtest 5-2:1.0: FX2 device [19117.897728] usbtest 5-2:1.0: high-speed {control bulk-in bulk-out} tests (+alt)
I need firmware reset to factory defaults.
Can anybody help me?
Best regards,
Niko
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.