Ray Huang Posted December 2, 2017 Share Posted December 2, 2017 Hello, Some messages could not be displayed correctly as below when I boot Linux from the SD card accompanied with the Zedboard. Do you know how to fix it? Thanks. [ 0.680000] io scheduler deadline registered [ 0.680000] io scheduler cfq registered (default) 蝴芺悼?徘??氳"?J褕聒滯蝴栫AMu僚蝸? 掃諸 Ⅱ由﹟伐柲[ 0.710000] [drm] Initialized drm 1.1.0 20060810 [ 0.720000] brd: module loaded [ 0.730000] loop: module loaded Best regards, Ray Huang Link to comment Share on other sites More sharing options...
jpeyron Posted December 14, 2017 Share Posted December 14, 2017 Hi @Ray Huang, Your 8GB with adapter should work just fine as long as the sd card is formatted to FAT32. Also just copy and past the contents of the sd_image onto the sd card and you should be good. I have attached a screen shot of the contents you need to copy. thank you, Jon Link to comment Share on other sites More sharing options...
Ray Huang Posted December 9, 2017 Author Share Posted December 9, 2017 Here is the description at the start-up with removal of problem lines at 69 an d 70. Spoiler 3694108 bytes read ## Starting application at 0x00008000 ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.3.0-digilent-12.07-zed-beta (tinghui.wang@DIGILENT_LINUX) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50) ) #2 SMP PREEMPT Thu Jul 12 21:01:42 PDT 2012 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Xilinx Zynq Platform, model: Xilinx Zynq ZED [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] BUG: mapping for 0xf8f00000 at 0xfe00c000 out of vmalloc space [ 0.000000] BUG: mapping for 0xe0000000 at 0xfe000000 out of vmalloc space [ 0.000000] BUG: mapping for 0xffff1000 at 0xfe200000 out of vmalloc space [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1489000 s5696 r8192 d14784 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125824 [ 0.000000] Kernel command line: console=ttyPS0,115200 root=/dev/ram rw initrd=0x800000,8M earlyprintk rootfstype=ext4 rootwait devtmpfs.mount=0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 240MB 256MB = 496MB total [ 0.000000] Memory: 489856k/489856k available, 34432k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xfd000000 ( 456 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc042f040 (4253 kB) [ 0.000000] .init : 0xc0430000 - 0xc0456640 ( 154 kB) [ 0.000000] .data : 0xc0458000 - 0xc0485dc0 ( 184 kB) [ 0.000000] .bss : 0xc0485de4 - 0xc049d734 ( 95 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:128 [ 0.000000] xlnx,ps7-ttc-1.00.a #0 at 0xe0800000, irq=43 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.090000] Mount-cache hash table entries: 512 [ 0.090000] CPU: Testing write buffer coherency: ok [ 0.090000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.100000] smp_twd: clock not found: -2 [ 0.100000] Calibrating local timer... 399.37MHz. [ 0.170000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.170000] Setting up static identity map for 0x2f8d48 - 0x2f8d7c [ 0.270000] CPU1: Booted secondary processor [ 0.310000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.310000] Brought up 2 CPUs [ 0.310000] SMP: Total of 2 processors activated (3188.32 BogoMIPS). [ 0.320000] devtmpfs: initialized [ 0.320000] ------------[ cut here ]------------ [ 0.320000] WARNING: at arch/arm/mm/dma-mapping.c:198 consistent_init+0x70/0x104() [ 0.330000] Modules linked in: [ 0.330000] [<c0012920>] (unwind_backtrace+0x0/0xe0) from [<c001e924>] (warn_slowpath_common+0x4c/0x64) [ 0.340000] [<c001e924>] (warn_slowpath_common+0x4c/0x64) from [<c001e954>] (warn_slowpath_null+0x18/0x1c) [ 0.350000] [<c001e954>] (warn_slowpath_null+0x18/0x1c) from [<c04345a8>] (consistent_init+0x70/0x104) [ 0.360000] [<c04345a8>] (consistent_init+0x70/0x104) from [<c000858c>] (do_one_initcall+0x90/0x160) [ 0.360000] [<c000858c>] (do_one_initcall+0x90/0x160) from [<c043085c>] (kernel_init+0x84/0x128) [ 0.370000] [<c043085c>] (kernel_init+0x84/0x128) from [<c000dfcc>] (kernel_thread_exit+0x0/0x8) [ 0.380000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.380000] ------------[ cut here ]------------ [ 0.390000] WARNING: at arch/arm/mm/dma-mapping.c:198 consistent_init+0x70/0x104() [ 0.390000] Modules linked in: [ 0.390000] [<c0012920>] (unwind_backtrace+0x0/0xe0) from [<c001e924>] (warn_slowpath_common+0x4c/0x64) [ 0.400000] [<c001e924>] (warn_slowpath_common+0x4c/0x64) from [<c001e954>] (warn_slowpath_null+0x18/0x1c) [ 0.410000] [<c001e954>] (warn_slowpath_null+0x18/0x1c) from [<c04345a8>] (consistent_init+0x70/0x104) [ 0.420000] [<c04345a8>] (consistent_init+0x70/0x104) from [<c000858c>] (do_one_initcall+0x90/0x160) [ 0.430000] [<c000858c>] (do_one_initcall+0x90/0x160) from [<c043085c>] (kernel_init+0x84/0x128) [ 0.430000] [<c043085c>] (kernel_init+0x84/0x128) from [<c000dfcc>] (kernel_thread_exit+0x0/0x8) [ 0.440000] ---[ end trace 1b75b31a2719ed1d ]--- [ 0.440000] NET: Registered protocol family 16 [ 0.460000] L310 cache controller enabled [ 0.460000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72060000, Cache size: 524288 B [ 0.460000] registering platform device 'pl330' id 0 [ 0.470000] registering platform device 'arm-pmu' id 0 [ 0.470000] [ 0.470000] ############################################### [ 0.480000] # # [ 0.480000] # Board ZED Init # [ 0.480000] # # [ 0.490000] ############################################### [ 0.490000] [ 0.500000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.500000] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.530000] xslcr xslcr.0: at 0xF8000000 mapped to 0xE0808000 [ 0.540000] bio: create slab <bio-0> at 0 [ 0.540000] gpiochip_add: registered GPIOs 0 to 245 on device: xgpiops [ 0.540000] xgpiops e000a000.gpio: gpio at 0xe000a000 mapped to 0xe080a000 [ 0.550000] SCSI subsystem initialized [ 0.550000] usbcore: registered new interface driver usbfs [ 0.560000] usbcore: registered new interface driver hub [ 0.560000] usbcore: registered new device driver usb [ 0.570000] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.570000] Switching to clocksource xttcpss_timer1 [ 0.580000] NET: Registered protocol family 2 [ 0.580000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.580000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.590000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [ 0.590000] TCP: Hash tables configured (established 16384 bind 16384) [ 0.600000] TCP reno registered [ 0.600000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.610000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.610000] NET: Registered protocol family 1 [ 0.620000] Trying to unpack rootfs image as initramfs... [ 0.620000] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.650000] Freeing initrd memory: 8192K [ 0.660000] xscugtimer xscugtimer.0: ioremap fe00c200 to e0810200 with size 400 [ 0.660000] pl330 dev 0 probe success [ 0.670000] msgmni has been set to 972 [ 0.670000] io scheduler noop registered [ 0.670000] io scheduler deadline registered [ 0.670000] io scheduler cfq registered (default) [ 0.700000] [drm] Initialized drm 1.1.0 20060810 [ 0.710000] brd: module loaded [ 0.720000] loop: module loaded [ 0.720000] xqspips e000d000.qspi: at 0xE000D000 mapped to 0xE0816000, irq=51 [ 0.730000] GEM: BASEADDRESS hw: e000b000 virt: e0818000 [ 0.730000] XEMACPS mii bus: probed [ 0.740000] eth0, pdev->id -1, baseaddr 0xe000b000, irq 54 [ 0.740000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.750000] usb_hcd_xusbps_probe: No OTG assigned! [ 0.750000] usb_hcd_xusbps_probe: OTG now assigned! [ 0.750000] xusbps-ehci xusbps-ehci.0: Xilinx PS USB EHCI Host Controller [ 0.760000] xusbps-ehci xusbps-ehci.0: new USB bus registered, assigned bus number 1 [ 0.800000] xusbps-ehci xusbps-ehci.0: irq 53, io mem 0x00000000 [ 0.820000] xusbps-ehci xusbps-ehci.0: USB 2.0 started, EHCI 1.00 [ 0.820000] hub 1-0:1.0: USB hub found [ 0.820000] hub 1-0:1.0: 1 port detected [ 0.830000] Initializing USB Mass Storage driver... [ 0.830000] usbcore: registered new interface driver usb-storage [ 0.840000] USB Mass Storage support registered. [ 0.840000] Xilinx PS USB Device Controller driver (Apr 01, 2011) [ 0.850000] mousedev: PS/2 mouse device common for all mice [ 0.850000] Linux video capture interface: v2.00 [ 0.860000] gspca_main: v2.14.0 registered [ 0.860000] usbcore: registered new interface driver uvcvideo [ 0.860000] USB Video Class driver (1.1.1) [ 0.870000] WDT OF probe [ 0.870000] xwdtps f8005000.swdt: Xilinx Watchdog Timer at 0xe081c000 with timeout 10 seconds [ 0.880000] sdhci: Secure Digital Host Controller Interface driver [ 0.880000] sdhci: Copyright(c) Pierre Ossman [ 0.890000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.890000] mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA [ 0.900000] usbcore: registered new interface driver usbhid [ 0.900000] usbhid: USB HID core driver [ 0.910000] No connectors reported connected with modes [ 0.910000] [drm] Cannot find any crtc or sizes - going 1024x768 [ 0.920000] adv7511 0-0039: Failed to add route DAI IN->TMDS [ 0.930000] drivers/gpu/drm/analog/analog_drm_fbdev.c:analog_drm_fbdev_probe[241] [ 0.950000] asoc: adv7511 <-> 75c00000.axi-spdif-tx mapping ok [ 0.960000] axi-spdif 75c00000.axi-spdif-tx: Failed to set DAI format: -22 [ 0.960000] ALSA device list: [ 0.960000] #0: HDMI monitor [ 0.960000] TCP cubic registered [ 0.960000] NET: Registered protocol family 17 [ 0.960000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.960000] Registering SWP/SWPB emulation handler [ 0.960000] Console: switching to colour frame buffer device 128x48 [ 0.970000] registered taskstats version 1 [ 0.970000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.980000] mmc0: new high speed SDHC card at address 0007 [ 0.980000] mmcblk0: mmc0:0007 DDINC 3.70 GiB [ 1.010000] mmcblk0: p1 [ 1.020000] fb0: frame buffer device [ 1.020000] drm: registered panic notifier [ 1.020000] [drm] Initialized analog_drm 1.0.0 20110530 on minor 0 [ 1.030000] RAMDISK: gzip image found at block 0 [ 1.290000] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended [ 1.300000] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) [ 1.310000] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 1.310000] Freeing init memory: 152K Starting rcS... ++ Mounting filesystem ++ Setting up mdev ++ Configure static IP 192.168.1.10 [ 1.500000] GEM: lp->tx_bd ffdfb000 lp->tx_bd_dma 18fd9000 lp->tx_skb d8abbac0 [ 1.500000] GEM: lp->rx_bd ffdfc000 lp->rx_bd_dma 18fda000 lp->rx_skb d8abbbc0 [ 1.510000] GEM: MAC 0x00350a00, 0x00002201, 00:0a:35:00:01:22 [ 1.510000] GEM: phydev d8351a00, phydev->phy_id 0x1410dd1, phydev->addr 0x0 [ 1.520000] eth0, phy_addr 0x0, phy_id 0x01410dd1 [ 1.520000] eth0, attach [Marvell 88E1510] phy driver ++ Starting telnet daemon ++ Starting http daemon ++ Starting ftp daemon ++ Starting dropbear (ssh) daemon ++ Starting OLED Display [ 1.560000] pmodoled-gpio-spi [zed_oled] SPI Probing ++ Exporting LEDs & SWs rcS Complete zynq> Link to comment Share on other sites More sharing options...
Ray Huang Posted December 9, 2017 Author Share Posted December 9, 2017 I think that some prohibited letters are used or there are some typo at line 0.68 and 0.69. So, it can't display correctly. I tried for several times with different setting at the terminal. Similar issue is happened at these lines. You can find a Zedboard and any accompanied SD card to check. Link to comment Share on other sites More sharing options...
jpeyron Posted December 3, 2017 Share Posted December 3, 2017 Hi @Ray Huang, Can you attach more of the message to better see whats going on. thank you, Jon Link to comment Share on other sites More sharing options...
jpeyron Posted December 11, 2017 Share Posted December 11, 2017 Hi @Ray Huang, Tomorrow is the soonest I can test the oob sd demo for the Zedboard. Sorry for the inconvenience. thank you, Jon Link to comment Share on other sites More sharing options...
jpeyron Posted December 12, 2017 Share Posted December 12, 2017 Hi @Ray Huang, I ran the out of box demo on the zedboard without typo issues today. Spoiler U-Boot 2012.04.01-00297-gc319bf9-dirty (Sep 13 2012 - 09:30:49) DRAM: 512 MiB WARNING: Caches not enabled MMC: SDHCI: 0 Using default environment In: serial Out: serial Err: serial Net: zynq_gem Hit any key to stop autoboot: 0 Copying Linux from SD to RAM... Device: SDHCI Manufacturer ID: 0 OEM: 0 Name: SD4GB Tran Speed: 25000000 Rd Block Len: 512 SD version 1.0 High Capacity: Yes Capacity: 3.7 GiB Bus Width: 1-bit reading zImage 2479640 bytes read reading devicetree_ramdisk.dtb 5817 bytes read reading ramdisk8M.image.gz 3694108 bytes read ## Starting application at 0x00008000 ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.3.0-digilent-12.07-zed-beta (tinghui.wang@DIGILENT_LINUX) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50) ) #2 SMP PREEMPT Thu Jul 12 21:01:42 PDT 2012 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Xilinx Zynq Platform, model: Xilinx Zynq ZED [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] BUG: mapping for 0xf8f00000 at 0xfe00c000 out of vmalloc space [ 0.000000] BUG: mapping for 0xe0000000 at 0xfe000000 out of vmalloc space [ 0.000000] BUG: mapping for 0xffff1000 at 0xfe200000 out of vmalloc space [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1489000 s5696 r8192 d14784 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125824 [ 0.000000] Kernel command line: console=ttyPS0,115200 root=/dev/ram rw initrd=0x800000,8M earlyprintk rootfstype=ext4 rootwait devtmpfs.mount=0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 240MB 256MB = 496MB total [ 0.000000] Memory: 489856k/489856k available, 34432k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xfd000000 ( 456 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc042f040 (4253 kB) [ 0.000000] .init : 0xc0430000 - 0xc0456640 ( 154 kB) [ 0.000000] .data : 0xc0458000 - 0xc0485dc0 ( 184 kB) [ 0.000000] .bss : 0xc0485de4 - 0xc049d734 ( 95 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:128 [ 0.000000] xlnx,ps7-ttc-1.00.a #0 at 0xe0800000, irq=43 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.090000] Mount-cache hash table entries: 512 [ 0.090000] CPU: Testing write buffer coherency: ok [ 0.090000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.100000] smp_twd: clock not found: -2 [ 0.100000] Calibrating local timer... 399.36MHz. [ 0.170000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.170000] Setting up static identity map for 0x2f8d48 - 0x2f8d7c [ 0.270000] CPU1: Booted secondary processor [ 0.310000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.310000] Brought up 2 CPUs [ 0.310000] SMP: Total of 2 processors activated (3188.32 BogoMIPS). [ 0.320000] devtmpfs: initialized [ 0.320000] ------------[ cut here ]------------ [ 0.320000] WARNING: at arch/arm/mm/dma-mapping.c:198 consistent_init+0x70/0x104() [ 0.330000] Modules linked in: [ 0.330000] [<c0012920>] (unwind_backtrace+0x0/0xe0) from [<c001e924>] (warn_slowpath_common+0x4c/0x64) [ 0.340000] [<c001e924>] (warn_slowpath_common+0x4c/0x64) from [<c001e954>] (warn_slowpath_null+0x18/0x1c) [ 0.350000] [<c001e954>] (warn_slowpath_null+0x18/0x1c) from [<c04345a8>] (consistent_init+0x70/0x104) [ 0.360000] [<c04345a8>] (consistent_init+0x70/0x104) from [<c000858c>] (do_one_initcall+0x90/0x160) [ 0.360000] [<c000858c>] (do_one_initcall+0x90/0x160) from [<c043085c>] (kernel_init+0x84/0x128) [ 0.370000] [<c043085c>] (kernel_init+0x84/0x128) from [<c000dfcc>] (kernel_thread_exit+0x0/0x8) [ 0.380000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.380000] ------------[ cut here ]------------ [ 0.390000] WARNING: at arch/arm/mm/dma-mapping.c:198 consistent_init+0x70/0x104() [ 0.390000] Modules linked in: [ 0.390000] [<c0012920>] (unwind_backtrace+0x0/0xe0) from [<c001e924>] (warn_slowpath_common+0x4c/0x64) [ 0.400000] [<c001e924>] (warn_slowpath_common+0x4c/0x64) from [<c001e954>] (warn_slowpath_null+0x18/0x1c) [ 0.410000] [<c001e954>] (warn_slowpath_null+0x18/0x1c) from [<c04345a8>] (consistent_init+0x70/0x104) [ 0.420000] [<c04345a8>] (consistent_init+0x70/0x104) from [<c000858c>] (do_one_initcall+0x90/0x160) [ 0.430000] [<c000858c>] (do_one_initcall+0x90/0x160) from [<c043085c>] (kernel_init+0x84/0x128) [ 0.430000] [<c043085c>] (kernel_init+0x84/0x128) from [<c000dfcc>] (kernel_thread_exit+0x0/0x8) [ 0.440000] ---[ end trace 1b75b31a2719ed1d ]--- [ 0.440000] NET: Registered protocol family 16 [ 0.460000] L310 cache controller enabled [ 0.460000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72060000, Cache size: 524288 B [ 0.460000] registering platform device 'pl330' id 0 [ 0.470000] registering platform device 'arm-pmu' id 0 [ 0.470000] [ 0.470000] ############################################### [ 0.480000] # # [ 0.480000] # Board ZED Init # [ 0.480000] # # [ 0.490000] ############################################### [ 0.490000] [ 0.500000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.500000] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.520000] xslcr xslcr.0: at 0xF8000000 mapped to 0xE0808000 [ 0.540000] bio: create slab <bio-0> at 0 [ 0.540000] gpiochip_add: registered GPIOs 0 to 245 on device: xgpiops [ 0.540000] xgpiops e000a000.gpio: gpio at 0xe000a000 mapped to 0xe080a000 [ 0.550000] SCSI subsystem initialized [ 0.550000] usbcore: registered new interface driver usbfs [ 0.560000] usbcore: registered new interface driver hub [ 0.560000] usbcore: registered new device driver usb [ 0.570000] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.570000] Switching to clocksource xttcpss_timer1 [ 0.580000] NET: Registered protocol family 2 [ 0.580000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.580000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.590000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [ 0.590000] TCP: Hash tables configured (established 16384 bind 16384) [ 0.600000] TCP reno registered [ 0.600000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.610000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.610000] NET: Registered protocol family 1 [ 0.620000] Trying to unpack rootfs image as initramfs... [ 0.620000] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.660000] Freeing initrd memory: 8192K [ 0.660000] xscugtimer xscugtimer.0: ioremap fe00c200 to e0810200 with size 400 [ 0.660000] pl330 dev 0 probe success [ 0.670000] msgmni has been set to 972 [ 0.670000] io scheduler noop registered [ 0.670000] io scheduler deadline registered [ 0.670000] io scheduler cfq registered (default) [ 0.680000] e00 0.680000] console [ttyPS0] enabled, bootconsole disabled [ 0.680000] console [ttyPS0] enabled, bootconsole disabled [ 0.690000] xdevcfg f8007000.devcfg: ioremap f8007000 to e0814000 with size 1000 [ 0.700000] [drm] Initialized drm 1.1.0 20060810 [ 0.710000] brd: module loaded [ 0.720000] loop: module loaded [ 0.720000] xqspips e000d000.qspi: at 0xE000D000 mapped to 0xE0816000, irq=51 [ 0.730000] GEM: BASEADDRESS hw: e000b000 virt: e0818000 [ 0.730000] XEMACPS mii bus: probed [ 0.740000] eth0, pdev->id -1, baseaddr 0xe000b000, irq 54 [ 0.740000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.750000] usb_hcd_xusbps_probe: No OTG assigned! [ 0.750000] usb_hcd_xusbps_probe: OTG now assigned! [ 0.750000] xusbps-ehci xusbps-ehci.0: Xilinx PS USB EHCI Host Controller [ 0.760000] xusbps-ehci xusbps-ehci.0: new USB bus registered, assigned bus number 1 [ 0.800000] xusbps-ehci xusbps-ehci.0: irq 53, io mem 0x00000000 [ 0.830000] xusbps-ehci xusbps-ehci.0: USB 2.0 started, EHCI 1.00 [ 0.830000] hub 1-0:1.0: USB hub found [ 0.830000] hub 1-0:1.0: 1 port detected [ 0.840000] Initializing USB Mass Storage driver... [ 0.840000] usbcore: registered new interface driver usb-storage [ 0.850000] USB Mass Storage support registered. [ 0.850000] Xilinx PS USB Device Controller driver (Apr 01, 2011) [ 0.860000] mousedev: PS/2 mouse device common for all mice [ 0.860000] Linux video capture interface: v2.00 [ 0.870000] gspca_main: v2.14.0 registered [ 0.870000] usbcore: registered new interface driver uvcvideo [ 0.870000] USB Video Class driver (1.1.1) [ 0.880000] WDT OF probe [ 0.880000] xwdtps f8005000.swdt: Xilinx Watchdog Timer at 0xe081c000 with timeout 10 seconds [ 0.890000] sdhci: Secure Digital Host Controller Interface driver [ 0.890000] sdhci: Copyright(c) Pierre Ossman [ 0.900000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.900000] mmc0: Invalid maximum block size, assuming 512 bytes [ 0.910000] No connectors reported connected with modes [ 0.910000] [drm] Cannot find any crtc or sizes - going 1024x768 [ 0.920000] mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA [ 0.920000] usbcore: registered new interface driver usbhid [ 0.930000] drivers/gpu/drm/analog/analog_drm_fbdev.c:analog_drm_fbdev_probe[241] [ 0.940000] usbhid: USB HID core driver [ 0.940000] adv7511 0-0039: Failed to add route DAI IN->TMDS [ 0.960000] Console: switching to colour frame buffer device 128x48 [ 0.970000] asoc: adv7511 <-> 75c00000.axi-spdif-tx mapping ok [ 0.980000] axi-spdif 75c00000.axi-spdif-tx: Failed to set DAI format: -22 [ 0.990000] fb0: frame buffer device [ 0.990000] drm: registered panic notifier [ 0.990000] ALSA device list: [ 0.990000] #0: HDMI monitor [ 1.000000] [drm] Initialized analog_drm 1.0.0 20110530 on minor 0 [ 1.000000] TCP cubic registered [ 1.000000] NET: Registered protocol family 17 [ 1.000000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 1.020000] Registering SWP/SWPB emulation handler [ 1.020000] registered taskstats version 1 [ 1.030000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.030000] RAMDISK: gzip image found at block 0 [ 1.050000] mmc0: new high speed SDHC card at address 0001 [ 1.050000] mmcblk0: mmc0:0001 SD4GB 3.72 GiB [ 1.060000] mmcblk0: p1 [ 1.300000] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended [ 1.310000] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) [ 1.320000] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 1.320000] Freeing init memory: 152K Starting rcS... ++ Mounting filesystem ++ Setting up mdev ++ Configure static IP 192.168.1.10 [ 1.510000] GEM: lp->tx_bd ffdfb000 lp->tx_bd_dma 193de000 lp->tx_skb d8ac6480 [ 1.510000] GEM: lp->rx_bd ffdfc000 lp->rx_bd_dma 193e0000 lp->rx_skb d8ac6580 [ 1.520000] GEM: MAC 0x00350a00, 0x00002201, 00:0a:35:00:01:22 [ 1.530000] GEM: phydev d8be8c00, phydev->phy_id 0x1410dd1, phydev->addr 0x0 [ 1.530000] eth0, phy_addr 0x0, phy_id 0x01410dd1 [ 1.530000] eth0, attach [Marvell 88E1510] phy driver ++ Starting telnet daemon ++ Starting http daemon ++ Starting ftp daemon ++ Starting dropbear (ssh) daemon ++ Starting OLED Display [ 1.580000] pmodoled-gpio-spi [zed_oled] SPI Probing ++ Exporting LEDs & SWs rcS Complete zynq> I know that sometimes serial terminals can show weird characters. What serial terminal are you using? I would suggest tera term. cheers, Jon Link to comment Share on other sites More sharing options...
Ray Huang Posted December 13, 2017 Author Share Posted December 13, 2017 Hi Jon, I'm using Tera Term ver. 4.96 in Windows 7 Pro. The issue still happened. Link to comment Share on other sites More sharing options...
Ray Huang Posted December 13, 2017 Author Share Posted December 13, 2017 Here is the attachment for screen shot with terminal version. Does it mean the original SD card has some issue? Thanks. Link to comment Share on other sites More sharing options...
Ray Huang Posted December 13, 2017 Author Share Posted December 13, 2017 Hi Jon, After removing current Tera Term and install an older version, a similar issue still happened. Could you please teach me how to get a resource to reload related files to SD card? If you could help me, I can send the accompanied SD card to Digilent, too. Thanks. Link to comment Share on other sites More sharing options...
jpeyron Posted December 13, 2017 Share Posted December 13, 2017 Hi @Ray Huang, What REV is your Zedboard? The OOB demo can be found on the resource center under Additional Resources. If you have an extra sd card please download the zip file and place the contents of the sd_image folder on the sd card which should be formatted to fat32. Do you still get the issue on lines 69 and 70? I have also reached out to our embedded linux engineer to see if they have any additional input. cheers, Jon Link to comment Share on other sites More sharing options...
Ray Huang Posted December 14, 2017 Author Share Posted December 14, 2017 Hi @jpeyron My Zedboard is a new one with REV D. I bought it from Digi-key to save shipping cost. I'll try to reload the contents of the SD_image folder on a SD card. But, I'm not familiar with the process and will take some time. I have another 8GB empty MicroSD card with adapter which I bought from Digilent. Does it work to replace a 4GB SD card accompanied by Zedboard? Thanks. Best regards, Ray Huang Link to comment Share on other sites More sharing options...
Question
Ray Huang
Hello,
Some messages could not be displayed correctly as below when I boot Linux from the SD card accompanied with the Zedboard. Do you know how to fix it? Thanks.
[ 0.680000] io scheduler deadline registered
[ 0.680000] io scheduler cfq registered (default)
蝴芺悼?徘??氳"?J褕聒滯蝴栫AMu僚蝸? 掃諸
Ⅱ由﹟伐柲[ 0.710000] [drm] Initialized drm 1.1.0 20060810
[ 0.720000] brd: module loaded
[ 0.730000] loop: module loaded
Best regards,
Ray Huang
Link to comment
Share on other sites
11 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.