Jay Sngh Posted November 18, 2017 Share Posted November 18, 2017 Does Bays3 can be only programmed using Xilinx ISE or shall it require Vivado to program it. Link to comment Share on other sites More sharing options...
Alex Posted November 19, 2017 Share Posted November 19, 2017 I assume you mean ISE webpack? If so, you recommend to program Basys 3 with Vivado webpack. I think you might be able to program Basys 3 with ISE webpack with Adept but haven't tried that. Perhaps other memebers can tell you. Link to comment Share on other sites More sharing options...
jpeyron Posted November 20, 2017 Share Posted November 20, 2017 Hi @Jay Sngh, The Basys 3 will not work in ISE. The Basys 3 has a XC7A35T fpga which is not supported in ISE. Here is a xilinx support answer discussing this. thank you, Jon Link to comment Share on other sites More sharing options...
Jay Sngh Posted November 21, 2017 Author Share Posted November 21, 2017 Is there any license which is provided alongwith Basys 3 board. Can the Basys3 board programmed using Vivado webpack ? Link to comment Share on other sites More sharing options...
jpeyron Posted November 21, 2017 Share Posted November 21, 2017 Hi @Jay Sngh, There is no license provided with the Basys 3 board. We would suggest using Vivado's design edition which can be downloaded and used on a non-design edition target such as the Basys 3 without a license. If you are concerned with Vivado's size and are not going to use a virtex or kintex fpga you can also uncheck these boxes in the initial download options. cheers, Jon Link to comment Share on other sites More sharing options...
Question
Jay Sngh
Does Bays3 can be only programmed using Xilinx ISE or shall it require Vivado to program it.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.