Doesn't work the tutorial(Getting Started with Zynq Servers)

[TM-san]

Hi,

I'm trying the tutorial(https://reference.digilentinc.com/learn/programmable-logic/tutorials/zybo-getting-started-with-zynq-server/start), but it doesn't work.

I create a project in Vivado 2016.2 and SDK 2016.2.

So, may I have the sample project in vivado and sdk 2016.2?

 

Thanks,

TM-san

[Sergiu]

Hello,

Could you please provide more details regarding the problem? 

Also, please take a look at the following forum thread and see if it helps:

https://forum.digilentinc.com/topic/4354-zybo-server-demo-phy-autonegotiation-fails/

 

Sergiu

[TM-san]

Hi Sergiu,

Thank you so much for reply.

The test condition:

tool-> vivado and sdk in 2016.2(on Windows7)

terminal SW -> Tera term

 I'm sorry about my short description.

The  problem details are below:

1. According to the tutorial, the project is running on sdk.(the project runs on stand alone OS-whithout OS)

2. The console in Tera term shows error("Connection refusal")

 

Thanks,

TM-san

 

[jpeyron]

Hi @TM-san,

Could you please let us know what step I.E. 10.1 that you are having difficulties with. On step 11.1 does it configure the IP to 192.168.1.10? Did you set the internet protocol version 4 on your computer to something other than 192.168.1.10 like  192.168.1.11? So when you are connecting to the echo server through the Ethernet are you using the IP 192.168.1.10 or what the IP was shown on the serial terminal connected to through the usb on step 11.1? Screen shots of the issues would be helpful if you can.

cheers,

Jon

[TM-san]

Hi jpeyron,

Thank you so much to reply.

I attached the screen shot.

It contain that UART console(COM5-connected with zybo micro usb port(J11)-), TCP/IP connection error and network setting.

Would you check this?

 

Thanks,

TM-san

[jpeyron]

Hi @TM-san,

Could you please attache a screen shot of the selection what you are selecting before you get the connection refused error.

thank you,

Jon