i am using Vivado 2016.4 and i followed the steps at cmod-a7-programming-guide to create a BIN file from my project that i then loaded to the onboard ROM with no problem. If i use the 'Boot from configuration memory device' in Vivado the FPGA load the correct bitstream, but fi i power-cycle the FPGA (unplug and n plug USB) the DONE led never lits and my design is not loaded. I there any project configuration option that i forgot to tick ? Is there anything special in the constraints files to add to get this to work ?
Question
jpiat
Hi,
i am using Vivado 2016.4 and i followed the steps at cmod-a7-programming-guide to create a BIN file from my project that i then loaded to the onboard ROM with no problem. If i use the 'Boot from configuration memory device' in Vivado the FPGA load the correct bitstream, but fi i power-cycle the FPGA (unplug and n plug USB) the DONE led never lits and my design is not loaded. I there any project configuration option that i forgot to tick ? Is there anything special in the constraints files to add to get this to work ?
Thanks
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.