jsv Posted July 8, 2017 Share Posted July 8, 2017 Hi, I'm new to FPGA and would like to start it with "Zybo Zynq-7000 ARM/FPGA SoC Trainer Board". I was wondering if anyone can help me on just a simple application first like turning ON LED_0 when BTN_0 is at logic 1 (referring to BasicIO section in https://reference.digilentinc.com/reference/programmable-logic/zybo/reference-manual). Before that, I know C++ well and use it mostly in motion and I/O controllers. joven Link to comment Share on other sites More sharing options...
jpeyron Posted July 10, 2017 Share Posted July 10, 2017 Hi @jsv, Welcome to the forums! Here is a basic tutorial that will walk you through using the zynq processor as well as the buttons, Leds and uart communication with vivado/sdk. We also have some projects that connect buttons to leds here at the learn site. Here is a good site for some basics with fpga's. cheers, Jon Link to comment Share on other sites More sharing options...
jsv Posted July 11, 2017 Author Share Posted July 11, 2017 Thanks Jon! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.