erichahn Posted March 24, 2015 Share Posted March 24, 2015 Is it possible to use the Analog Discovery to analyze a CAN bus? CAN_L = 0v, CAN_H = 5v, for a 0. CAN_L = 2.5, CAN_H = 2.5 for 1. Typically operates at 1mbaud Link to comment Share on other sites More sharing options...
attila Posted March 25, 2015 Share Posted March 25, 2015 WaveForms application doesn't support CAN bus yet. The digital IO pins use LVCMOS3V3 standard. These are supplied at 3.3V and have protection: 200 Ohm thermistor and clamping diodes to GND and to 3.3V. So it could use CAN_L signal. Link to comment Share on other sites More sharing options...
Question
erichahn
Is it possible to use the Analog Discovery to analyze a CAN bus? CAN_L = 0v, CAN_H = 5v, for a 0. CAN_L = 2.5, CAN_H = 2.5 for 1.
Typically operates at 1mbaud
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.