Jump to content

Need Mean Time Between Failure (MTBF) for JTAG SMT2-NC


Recommended Posts


Unfortunately, We do not have the MTFB for the JTAG_SMT2-NC. For your second question, the typical current consumption from VDD (at 3.3V, VREF = 3.3V as well) is 9.5mA with no USB cable attached. With the USB cable attached and no data transfer its 55.5mA. During data transfer its 60.4mA average (with a few spikes to 78mA). The typical current consumption from VREF (at 3.3V with VDD = 3.3V) is 26uA with no ongoing data transfer, regardless of the USB cable. With a 15MHz data transfer the current consumption is 6mA. 

thank you,


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...