hassani14 Posted March 11, 2015 Share Posted March 11, 2015 Hello, I am planning to buy (410-292P-KIT), you can find it in the link below http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,1338&Prod=NEXYS4DDR I have some questions: Does it has Pmod input? Does it accept analog signals directly specifically voltage? If it does what is the maximum input voltage level? I believe it does not accept current input directly, is that right? Thanks, Link to comment Share on other sites More sharing options...
sbobrowicz Posted March 11, 2015 Share Posted March 11, 2015 Correction: Pmods are intended for use with 3.3V digital signals. You can apply up to about 3.8V without going over the absolute maximum input voltage of the FPGA I/O pins. You might get a little more leeway than that with the series resistors that are between the FPGA and the Pmods on the Nexys4DDR, but I wouldn't recommend testing this. Regarding the analog input Pmod: It can work just like a normal pmod and accept 3.3V digital signals, or it can be used as an input into the Artix 7's ADC. If used to accept analog signals, then it will only accurately measure voltages between 0 and 1 V. Link to comment Share on other sites More sharing options...
Alex Posted March 11, 2015 Share Posted March 11, 2015 Hi, it does include Pmod and direct analog input. I think the max input voltage is 5V. What do you mean by current input? You can have external power supplies and use the rail to regulate the power. All spec info is in the product webpage wiki. Link to comment Share on other sites More sharing options...
Question
hassani14
Hello,
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.