ragoreco Posted March 17, 2017 Share Posted March 17, 2017 Hello, I would like to know if the "Multi-Touch Display Shield: Smart Display" can be used with "chipKIT WF32: WiFi Enabled Microntroller Board with Uno R3 Headers" . Also if I could use HARMONY to access this display. Thank you, Link to comment Share on other sites More sharing options...
jpeyron Posted March 18, 2017 Share Posted March 18, 2017 Hi @ragoreco, Unfortunately, I will have to reach out to get that information for you. So at the latest I will get back to you on Monday. cheers, Jon Link to comment Share on other sites More sharing options...
jpeyron Posted March 21, 2017 Share Posted March 21, 2017 Hi @ragoreco, The Multi-Touch Display shield: Smart Display can be used with the chipKIT WF32. HARMONY does not have anything built for the Multi-Touch Display shield: Smart Display. cheers, Jon Link to comment Share on other sites More sharing options...
ragoreco Posted March 21, 2017 Author Share Posted March 21, 2017 Thank you Jon, Well it is good news, it can be used with chipKit WF32. I understand this display unit answer to commands sent via SPI. I have not been able to find any document with the API to control it, or the libraries for me to try integrate it with my own application. Do I need to install the ARDUINO IDE? would it give me access to the library firmware to migrate to my own app?. Thank you again. Ragoreco Link to comment Share on other sites More sharing options...
jpeyron Posted March 21, 2017 Share Posted March 21, 2017 HI @ragoreco, The library was written for the Arduino IDE and is available here along with documentation . You can use a text editor like notepad ++ to look at the library and demo code without installing the Arduino IDE. Hope this helps! cheers, Jon Link to comment Share on other sites More sharing options...
ragoreco Posted March 22, 2017 Author Share Posted March 22, 2017 Hi Jon, Thank you for all your help. Ragoreco Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.